RPS-PVC
5906675284040
Low-pressure, one-component polyurethane foam for PVC with a hose applicator
Define product parameters:
Catalog price for pc:
PLN46.11
net | VAT 23
Contact with us and check out our terms of cooperation
Catalog price for pc:
PLN46.11
net | VAT 23
Contact with us and check out our terms of cooperation
Product info
Low-pressure, one-component polyurethane foam for PVC with a hose applicator
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
Designing
E-learning training
Before use, make sure that the can has a positive temperature (optimal +20°C).
Application temperature from +5°C to +30°C.
Wear protective gloves. Shake the can vigorously (approx. 30 seconds) to thoroughly mix the ingredients.
Screw the applicator to the can. The working working position is "upside down".
Moisten surfaces with water prior to application.
Fill the gaps from bottom to top, in a zigzag pattern, alternating from one side to the other. Fill the gaps up to 60% of the depth, but not more than 5 cm per layer. Gaps wider than 5 cm should be filled in layers, after the previous layer has hardened. Moisten each layer with water after application using a sprayer.