Stainless steel A4 throughbolt R-HPTIIA4 12x115 mm - paper box - 50 pcs.
R-HPTIIA4-12115/20
5906675388106
Define product parameters:
Catalog price for bx:
PLN950.05
net | VAT 23
Contact with us and check out our terms of cooperation
R-HPTIIA4-12115/20
5906675388106
Define product parameters:
Catalog price for bx:
PLN950.05
net | VAT 23
Contact with us and check out our terms of cooperation
Catalog price for bx:
PLN950.05
net | VAT 23
Contact with us and check out our terms of cooperation
SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.
Aggressor SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
Rebardrill SDS Plus drill bits 12x200x260 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 12x200x260 mm - plastic hanger - 1 pc.
Pump for blowing drill cuttings - plastic bag - 1 pc.
Extended impact socket 1/2" 19x78 mm - plastic hanger - 1 pc.
R-HTW-20-100 Torque spanner 20-100 Nm 1/2" - plastic box - 1 pc.
Rebardrill SDS Max drill bit 12x200x340 mm - plastic hanger - 1 pc.
175 mm impact extension for 1/2 sockets - plastic hanger - 1 pc.
150mm fi 18.6mm tool for mechanical anchors, SDS plus - plastic hanger - 1 pc.
Product info
Stainless steel throughbolt anchor for cracked and non-cracked concrete
Rawlplug R-HPTII-A4 Stainless Steel Throughbolt
Mechanical anchoring in concrete – Rawlplug tutorial with R-HPT II-A4
Cracked concrete C20/25-C50/60
Non-cracked concrete C20/25-C50/60
Reinforced concrete
Unreinforced concrete
High-density natural stone
Approved surfaces
Balustrades
Barriers
Concrete structures
Elevators and escalators
Gates
Handrails
Repair of machinery
Seats in public facilities
Steel structures
Storage racks
Ventilated facades
Design Consulting
EasyFix
Design Consulting
Technical Support 2
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached.
Używając klucza dynamometrycznego dokręcić nakrętkę do wymaganego momentu
The anchor is correctly fixed.
Mechanical anchors - general characteristics and application - E-LEARNING
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
R-HPT - Throughbolts anchor for heavy loads - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
R-HPT - Throughbolts anchor for heavy loads - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR
R-HPT - Throughbolts anchor for heavy loads - WEBINAR
Road and bridge fixings design calculation - SERVICE
Concrete fixings design calculation - SERVICE
Masonry fixings design calculation - SERVICE
Mechanical anchors on-site test - SERVICE