R-CFS+KERII-600
5906675464817
Define product parameters:
Catalog price for bx:
PLN990.15
net | VAT 23
Contact with us and check out our terms of cooperation
Catalog price for bx:
PLN990.15
net | VAT 23
Contact with us and check out our terms of cooperation
Product info
Bonded anchor based on hybrid resin in 600ml foil loads
R-KER II bonded anchor – installation and application – how to use the product – Rawlplug tutorial
Rawlplug Deep Anchorage and post-installed rebar accessories system
Jak zamontować konstrukcję stalową?
Approved surfaces
Warranty
Customer service
BIM
Designing POS Displays
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 4 times.
Remove drill cuttings from the hole using the hand pump four times.
Clean drilled hole 4 times.
Place the foil pack in the squeezer.
When starting dosing from a new package, discard some of the resin until the mixture is uniform in color
Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.
Immediately after dispensing the resin, insert the rod into the hole with a twisting motion.
Remove the unnecessary amount of resin that flowed from the hole and wait for the appropriate time for the resin to cure.
The mount is ready to use.
Immediately after dispensing the resin, insert the rod into the hole with a twisting motion and allow the resin to set properly.
Leave the anchor undisturbed unitl the curing time elapses.
Chemical anchor with the rod is correctly installed.
Screw the rod into the sleeve with internal thread placed in the hole.
Place the bar in the hole and allow the setting time to elapse.
Properly installed sleeve with internal thread in the concrete base.