DIN 571 Coach Screws M10 x 70, Zinc Plated - Cardboard Box - 100 pcs
Timber
571-10070-ZN-100
5391512824730
DIN 571
Define product parameters:
Diameter
Length
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Features
DIN 571
- Wood screws with hexagon head according to DIN 571.
- Made of zinc-plated low-carbon steel.
- Hexagon flat head allows the screw to be flush with the surface.
- Thread geometry allowing application in all wood materials.
Substrates
Approved surfaces
Applications
Full list of variations
Diameter
Length
Diameter | Length | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|
| 12 mm | 100 mm | Cardboard box | 50 | 571-12100-ZN-50 | Contact with us and check out our terms of cooperation | |
| 10 mm | 100 mm | Cardboard box | 50 | 571-10100-ZN-50 | 5391512824761 | Contact with us and check out our terms of cooperation |
| 10 mm | 80 mm | Plastic bag | 10 | R-PDS-571-10080/10 | 5391528693757 | Contact with us and check out our terms of cooperation |
| 10 mm | 80 mm | Cardboard box | 100 | 571-10080-ZN-100 | 5391512824747 | Contact with us and check out our terms of cooperation |
| 10 mm | 100 mm | Plastic bag | 10 | R-PDS-571-10100/10 | 5391528693764 | Contact with us and check out our terms of cooperation |
| 8 mm | 70 mm | Plastic bag | 10 | R-PDS-571-08070/10 | 5391528693733 | Contact with us and check out our terms of cooperation |
| 12 mm | 80 mm | Cardboard box | 50 | 571-12080-ZN-50 | Contact with us and check out our terms of cooperation | |
| 8 mm | 50 mm | Plastic bag | 10 | R-PDS-571-08050/10 | 5391528693726 | Contact with us and check out our terms of cooperation |
| 12 mm | 80 mm | Plastic bag | 10 | R-PDS-571-12080/10 | 5391528693788 | Contact with us and check out our terms of cooperation |
| 8 mm | 100 mm | Plastic bag | 10 | R-PDS-571-08100/10 | 5391528693740 | Contact with us and check out our terms of cooperation |
Installation guide
Installation manual
Installation step by step
1
Drill a hole to the required diameter and depth for rebar size being used.
2
Insert the screw into the drilled hole in the wooden substrate.
3
Tighten the screw with a torque wrench until the head is flush with the ground.
4
Correctly fixed screw in the wooden substrate.