Universal
MBA-SS-08140
5906675049908
Define product parameters:
Material type
Length
Packaging and quantity
This product has been withdrawn from sale.
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Features
Fire-resistant metal insulation fixing
- Accessory spreader plate, MKC-SS (85mm diameter) also available for installation of soft insulation materials such as mineral wool.
- Metal facade fixing, recommended for use when fire resistance (F120) is a requirement.
- Extensive dimensional range allows anchorage of insulation boards up to 250mm thick.
- Fast and simple hammer-set installation reduces working times.
- Stainless steel material for high corrosion resistance.
Approved surfaces
Material type | Length | Packaging and quantity | Index | EAN | Catalog price for PAC. net |
|---|
Installation manual
Installation step by step
1
Drill hole to the required diameter and depth for rebar size being usee
2
Blow out dust at least 3 times with a hand pump.
3
Gently drive the MBA steel connector (with MKI plate) into the hole until the connector is anchored to the correct depth.
4
Correctly installed steel facade fixing.
5
Cut the hole in insulation board.
6
Drill a hole of appropriate diameter and depth.
7
Clean drilled hole 3 times.
8
Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.
9
Insert cap into countersunk hole in insulation board following installation of the facade fixing.
10
Correctly installed steel facade fixing.