MBA-SS-08250
5906675049939
Define product parameters:
Unit pack
125.00 pcs.4.53 kg
Bulk pack
125.00 pcs.4.53 kg
Pallet
6000.00 pcs.
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Fire-resistant metal insulation fixing
Approved surfaces
Design Consulting
E-learning training
Technical Support 2
Rawlplug Academy
Drill hole to the required diameter and depth for rebar size being usee
Blow out dust at least 3 times with a hand pump.
Gently drive the MBA steel connector (with MKI plate) into the hole until the connector is anchored to the correct depth.
Correctly installed steel facade fixing.
Cut the hole in insulation board.
Drill a hole of appropriate diameter and depth.
Clean drilled hole 3 times.
Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.
Insert cap into countersunk hole in insulation board following installation of the facade fixing.
Correctly installed steel facade fixing.
