Universal
R-BRUSH-20-TC
5906675432694
Define product parameters:
Diameter
Packaging and quantity
Weight and bulk packaging
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Steel cleaning brush for cleaning drilled holes with the possibility of extension
- Ideal for serial cleaning of deep holes.
- Hole cleaning is necessary for correct loads.
- Suitable for variable anchor embedment depths and even up to 2.5m.
- Suitable for repetitive and frequent use.
- Ideal set for serial cleaning.
Rawlplug Deep Anchorage and post-installed rebar accessories system
Approved surfaces
Diameter | Packaging and quantity | Index | EAN | Catalog price for PC. net |
|---|
Installation manual
Installation step by step
1
Drill a hole to the required diameter and depth for rebar size being used.
2
Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
3
Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.
4
Connect the drill set with the SDS tip.
5
Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.
Catalogues and product cards
(4)