R-CFS+GUN-600
5906675379289
Define product parameters:
Unit pack
1.00 pcs.1.11 kg
Bulk pack
1.00 pcs.1.11 kg
Pallet
100.00 pcs.
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Professional manual gun for bonded anchors in 600ml foil loads
Jakzamontowa_konstrukcj_stalow__
rawlplug_cfs_rv200_sty
Approved surfaces
Design Consulting
E-learning training
Training at the Rawlplug Academy center
Technical Support 2
When starting dosing from a new package, discard some of the resin until the mixture is uniform in color
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 4 times.
Blow out the dust at least 4 times with the hand pump.
Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.
Place the foil pack in the squeezer.
Insert the mixing nozzle to the far end of the hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.
Immediately after dosing the resin, place the rod in the hole with a rotational movement and wait for the appropriate resin setting time.
Leave the anchor undisturbed unitl the curing time elapses.