R-DCA-ST-20
5906675204932
Sleeve setting tool with internal thread
Define product parameters:
Unit Pack Quantity
0.85 kg
Bulk Pack Quantity
17.15 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Sleeve setting tool with internal thread
Approved surfaces
Metric diameter | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|
| M10 | Plastic hanger | 1 | R-DCA-ST-10 | 5906675204901 | Contact with us and check out our terms of cooperation |
| M20 | Cardboard box | 2 | R-DCA-ST-20 | 5906675204932 | Contact with us and check out our terms of cooperation |
| M6 | Plastic hanger | 1 | R-DCA-ST-06 | 5906675204888 | Contact with us and check out our terms of cooperation |
| M12 | Plastic hanger | 1 | R-DCA-ST-12 | 5906675204918 | Contact with us and check out our terms of cooperation |
| M8 | Plastic hanger | 1 | R-DCA-ST-08 | 5906675204895 | Contact with us and check out our terms of cooperation |
| M16 | Plastic hanger | 1 | R-DCA-ST-16 | 5906675204925 | Contact with us and check out our terms of cooperation |
Design Consulting
E-learning training
Rawlplug Academy
Training at the Rawlplug Academy center
Drill the hole and clean it up.
Blow out dust at least 4 times with a hand pump.
Insert the anchor into the hole and hammer it in until it is flush with the substrate.
By striking the special hammer with the hammer, expand the anchor in the hole.
(2)
(1)