1. Mainpage
  2. R-DCA-ST-II Manual Setting Tool For Drop-In Achors With Grip, M6 - label - 1 pc.

R-DCA-ST-II Manual Setting Tool For Drop-In Achors With Grip, M6 - label - 1 pc.

Solid walls

R-DCA-ST-II-06

5906675423449

Rawlplug

Manual setting tool

Define product parameters:

Metric diameter
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    1.00 pcs.2.78 kg

  • Bulk pack

    10.00 pcs.28.05 kg

  • Pallet

    560.00 pcs.1570.80 kg

Related products

R-DCL Lipped Drop-In Anchor M6 x 25mm - cardboard box - 100 pcs.

Internally threaded zinc plated lipped wedge anchor

R-DCA Drop-In Anchor M6 x 25mm - cardboard box - 100 pcs.

Internally threaded zinc plated wedge anchor

R-DCL Lipped Drop-In Anchor M6 x 25mm - cardboard box - 100 pcs.

Internally threaded zinc plated lipped wedge anchor

R-DCA Drop-In Anchor M6 x 25mm - cardboard box - 100 pcs.

Internally threaded zinc plated wedge anchor

Features

Manual setting tool

  • Unique tool for installing R-DCA and R-DCL anchors.
  • Manual installation of wedge anchors with rubber grip and hand protection.
  • The ergonomic rubber grip ensures a comfortable installation.

Substrates

Cracked concrete C20/25-C50/60

Cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Solid concrete block

Solid concrete block

Granite

Granite

High-density natural stone

High-density natural stone

Approved surfaces

Applications

Air conditioning / ventilation

Ceiling mounts

Sanitary and gas installations

Sprinkler installations

Steel structures

Swings

Pipelines

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

E-learning training

E-learning training

Technical Support 2

Technical Support 2

Installation guide

Installation manual

Installation step by step

1

Drill hole to the required diameter

2

Clear the hole of drilling dust and debris (using blowpump or equivalent method)

3

Tap on the sleeve anchor with a skein

4

Place the punch into the hole in the sleeve anchor

5

By using a hammer and a hammer, the anchor is correctly installed in the hole

Installation data

Approvals and publications

Technical library and approvals

Choose document:

1488-CPR-0328/Z

ETA-13/0584

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF