R-DCA-ST-II-10
5906675423463
Manual setting tool
Define product parameters:
Unit Pack Quantity
3.33 kg
Bulk Pack Quantity
33.57 kg
Pallet Quantity
805.66 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Manual setting tool
Approved surfaces
Metric diameter | Length | Type of package | Piece. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|
| M10 | 23 mm | Without packaging | 1 | R-DCA-ST-II-10 | 5906675423463 | Contact with us and check out our terms of cooperation |
| M12 | 28 mm | Without packaging | 1 | R-DCA-ST-II-12 | 5906675423470 | Contact with us and check out our terms of cooperation |
| M6 | 14.8 mm | Without packaging | 1 | R-DCA-ST-II-06 | 5906675423449 | Contact with us and check out our terms of cooperation |
| M8 | 18 mm | Without packaging | 1 | R-DCA-ST-II-08 | 5906675423456 | Contact with us and check out our terms of cooperation |
| M16 | 33 mm | Without packaging | 1 | R-DCA-ST-II-16 | 5906675423487 | Contact with us and check out our terms of cooperation |
Design Consulting
Training at the Rawlplug Academy center
E-learning training
Technical Support 2
Drill hole to the required diameter
Clear the hole of drilling dust and debris (using blowpump or equivalent method)
Tap on the sleeve anchor with a skein
Place the punch into the hole in the sleeve anchor
By using a hammer and a hammer, the anchor is correctly installed in the hole
(2)
(1)