R-HLX-10X180-HF-ZF
5906675533872
Define product parameters:
Pallet Quantity
735.00 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Induction hardened concrete screw anchor with hex head
Approved surfaces
Drill the hole with a hammer drill (1a) ) to the required depth according to the table
Clean the hole (blow dust at least 4 times with the hand pump). When using a dust-free drill bit (1b), it is not necessary to clean the hole..
Screw the concrete screw into the hole with an impact wrench and a suitable impact socket. Tighten until the fixture is clamped to the substrate. Installation with any tangential impact wrench. Finish screwing when the screw head touches the fastened element/substrate. The screw head must not be damaged
Possibility to unscrew the fixed anchor to a maximum height of 10mm. In the adjustment process, the permissible thickness of the fastened elements (Tfix) must be observed
Finish screwing when the anchor touches the fastened element. The adjustment operation can be performed twice
(14)
ETA-23/0707 (2025-01-24) - Cracked and uncracked concrete
R-HLX - Concrete screw for use in cracked and uncracked concrete
ETA-24/1104 (2025-06-03) - Non-structural systems
Concrete screw for use in concrete for redundant non-structural systems
DoP-23/0707 R-HLX (ETA-23/0707)
DoP-23/0707 R-HLX (ETA-23/0707 - 2025-01-24) - Concrete screw for use in cracked and uncracked concrete
DoP-24/1104-R-HLX (ETA-24/1104 - Non-structural systems)
R-HLX - Cpncrete screw for use in concrete for redundant non-structural systems.
1488-CPR-1100/W (ETA-23/0707)
CPR (ETA-23/0707 - 2025-01-24) - Concrete screw for use in cracked and uncracked concrete
1488-CPR-0745/Z (ETA-24/1104 - Non-structural systems)
CPR - ETA-24/1104 (2025-06-03) - Non-structural systems
EPD-R-HLX (2025-11-27)
Type III Environmental Declaration Certificate
(7)
