R-HPTIIZF-16105/10
5906675022987
Define product parameters:
Unit pack
25.00 pcs.4.60 kg
Bulk pack
25.00 pcs.4.60 kg
Pallet
4000.00 pcs.735.68 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Throughbolt anchor with corrosion-resistant coating for cracked and non-cracked concrete
rawlplug_rhptiizf_zinc
Rawlplug_Academy_czym_jest_i_jak_dziala_kotwa_mechaniczna
Approved surfaces
Diameter | Length | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|
| 20 mm | 200 mm | Cardboard box | 10 | R-HPTIIZF-20200/60 | 5906675023045 | Contact with us and check out our terms of cooperation |
| 16 mm | 140 mm | Cardboard box | 25 | R-HPTIIZF-16140/20 | 5906675022994 | Contact with us and check out our terms of cooperation |
| 12 mm | 135 mm | Cardboard box | 50 | R-HPTIIZF-12135/40 | 5906675022963 | Contact with us and check out our terms of cooperation |
| 12 mm | 120 mm | Cardboard box | 50 | R-HPTIIZF-12120/25 | 5906675022956 | Contact with us and check out our terms of cooperation |
| 20 mm | 160 mm | Cardboard box | 25 | R-HPTIIZF-20160/20 | 5906675023038 | Contact with us and check out our terms of cooperation |
| 16 mm | 105 mm | Cardboard box | 25 | R-HPTIIZF-16105/10 | 5906675022987 | Contact with us and check out our terms of cooperation |
| 10 mm | 130 mm | Cardboard box | 50 | R-HPTIIZF-10130/50 | 5906675022925 | Contact with us and check out our terms of cooperation |
| 8 mm | 80 mm | Cardboard box | 100 | R-HPTIIZF-08080/15 | 5906675022857 | Contact with us and check out our terms of cooperation |
| 10 mm | 95 mm | Cardboard box | 50 | R-HPTIIZF-10095/15 | 5906675022901 | Contact with us and check out our terms of cooperation |
| 12 mm | 100 mm | Cardboard box | 50 | R-HPTIIZF-12100/5 | 5906675022949 | Contact with us and check out our terms of cooperation |
Design Consulting
E-learning training
Training at the Rawlplug Academy center
Technical Support 2
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Insert the anchor into the hole through the fastening element and tap it with a hammer to the appropriate depth
Using a torque wrench, tighten the nut to the required torque
The anchor is installed correctly
(6)
(1)
