Universal
R-ISO-PLUG-80
5906675133546
Define product parameters:
Length
Packaging and quantity
Weight and bulk packaging
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Features
Spiral fixing for EPS
- Unique construction of screw thread section provides support for wide variety of diameters, without limitation of screws’ length.
- Unique self-drilling point allow precise installation through any type of façade plaster, preventing from breaking its surface.
- No loss of thermal transmittance at the anchoring point.
- Ribs on the internal surface of plate provide locking in surface during driving screws in and out and even surface of plug with substrate after fixing.
- Proper shape of TX/HEX socket provides stabilization during the process of driving in by providing necessary grip for the bit.
- Surface of the plate allows hiding installation hole and perfectly matches the surface of plaster layer, not deformating it.
- Can be installed with commercial drill/drive tool.
iso_plug_xl
rawlplug_isoplug_insul
Approved surfaces
Length | Packaging and quantity | Index | EAN | Catalog price for PAC. net |
|---|
Installation manual
Installation step by step
1
Drive ISO-PLUG into the insulation material (manually, or with an electric screwdriver) until installation depth reached.
2
Fixtures are fixed with a proper screw diameter. R-ISO-PLUG-50 with diameter of the screw between 4-5mm and R-ISO-PLUG-80 with screw diameter 6-7mm.
3
Insert screw of required diameter into plug through fixture and tighten.
4
Correctly installed ISO-PLUG with screw.
Installation data
Catalogues and product cards
(4)