Universal
R-NOZ-P-16-26
5906675433974
Define product parameters:
Hole diameter
Packaging and quantity
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Features
Resin dispensing tip in deep holes
- Absence of air bubbles in the hole.
- Dispensing of the appropriate volume of the resin.
- Uniform resin injection into the hole.
- Full control over the degree to which the hole is filled with resin.
Jakprawid_owowykona_g__bokiewklejaniepr_t_wzbrojeniowych_
Rawlplug Deep Anchorage and post-installed rebar accessories system
Approved surfaces
Hole diameter | Packaging and quantity | Index | EAN | Catalog price for PAC. net |
|---|
Installation manual
Installation step by step
1
Prepare the resin for application. Unscrew the safety plug.
2
Cut the PISTON PLUG with the required hole diameter.
3
Cut the PISTON PLUG with the required hole diameter.
4
Cut off about 10 cm of unmixed resin, then connect the other end of the hose to the resin mixer.
5
Connect the Piston PLUG tip to the Dosing PLUG tip.
6
Start dispensing the resin: the resin being injected will now be pushing the plug out of the hole (like a piston).
Catalogues and product cards
(4)