1. Mainpage
  2. R-NOZ dosing piston plug M28-M50mm - plastic bag - 1 pc.

R-NOZ dosing piston plug M28-M50mm - plastic bag - 1 pc.

Universal
New

R-NOZ-P-28-50

5906675433981

Resin dispensing tip in deep holes

Define product parameters:

Hole diameter
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    1.00 pcs.0.01 kg

  • Bulk pack

    25.00 pcs.0.52 kg

  • Pallet

    2200.00 pcs.45.50 kg

Related products

Extension of mixing nozzle R-NOZ 12/10 x3000mm - label - 1 pc.

Extension of mixing nozzle R-NOZ

R-NOZ Extension Tube for Nozzle, 300mm - plastic bag - 50 pcs.

Extension of mixing nozzle R-NOZ

Extension of mixing nozzle R-NOZ 12/10 x3000mm - label - 1 pc.

Extension of mixing nozzle R-NOZ

R-NOZ Extension Tube for Nozzle, 300mm - plastic bag - 50 pcs.

Extension of mixing nozzle R-NOZ

Features

Resin dispensing tip in deep holes

  • Absence of air bubbles in the hole.
  • Dispensing of the appropriate volume of the resin.
  • Uniform resin injection into the hole.
  • Full control over the degree to which the hole is filled with resin.

Product video

Jakprawid_owowykona_g__bokiewklejaniepr_t_wzbrojeniowych_

Rawlplug Deep Anchorage and post-installed rebar accessories system

Substrates

Concrete C12/15-C50/60

Concrete C12/15-C50/60

Approved surfaces

Applications

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Concrete structures

Drilling

Reinforcement of a large slab

Substitutes

R-NOZ dosing piston plug set M16-M50mm - plastic bag - 1 pc.

Resin dispensing tip in deep holes, set M16-M26+M28-M50

R-NOZ dosing piston plug set M16-M50mm - plastic bag - 1 pc.

Resin dispensing tip in deep holes, set M16-M26+M28-M50

Services

Design Consulting

Design Consulting

Technical Support 2

Technical Support 2

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Design Consulting

Design Consulting

Installation guide

Installation manual

Installation step by step

1

Prepare the resin for application. Unscrew the safety plug.

2

Cut the PISTON PLUG with the required hole diameter.

3

Cut the PISTON PLUG with the required hole diameter.

4

Cut off about 10 cm of unmixed resin, then connect the other end of the hose to the resin mixer.

5

Connect the Piston PLUG tip to the Dosing PLUG tip.

6

Start dispensing the resin: the resin being injected will now be pushing the plug out of the hole (like a piston).

Approvals and publications

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF