1. Mainpage
  2. Mansory nails 2.5x30mm - plastic bag - 20 pcs.

Mansory nails 2.5x30mm - plastic bag - 20 pcs.

Universal
Outlet

R-S1-MNL-25030/20

5906675324418

Rawlplug

Widely used in hard surfaces

Define product parameters:

Diameter
Length
Packaging and quantity

Features

Widely used in hard surfaces

  • Solid head providing rigid striking surface.
  • Zinc electroplated surface for enhanced corrosion resistance.
  • Long diamond shaped sharp point for easy drive in of the nail.
  • Made of low carbon hardened steel wire.

Substrates

Concrete

Concrete

Wood

Wood

Timber

Timber

Exotic wood

Exotic wood

Hollow brick

Hollow brick

Hollow sand-lime brick

Hollow sand-lime brick

Chipboard

Chipboard

Plywood

Plywood

Aerated concrete

Aerated concrete

Wood with metal

Wood with metal

Approved surfaces

Applications

Concrete structures

Frames, profiles, slats

Wooden constructions

Substitutes

PROCUT Construction screw with countersunk head and partial thread 3,0x30 mm - cardboard box - 1000 pcs.

Perfect for working with soft and hard wood

PROCUT Construction screw with countersunk head and full thread 3,5x30 mm - cardboard box - 1000 pcs.

Construction screw with countersunk head and full thread

Hardened chipboard screw TX, zinc plated TS 3,0x30 mm - cardboard box - 500 pcs.

Hardened screws for new generation wood composites and timber

Chipboard and wood screw with hardened countersunk head 3,0x30 mm - cardboard box - 1000 pcs.

For wood applications

PROCUT Construction screw with countersunk head and partial thread 3,0x30 mm - cardboard box - 1000 pcs.

Perfect for working with soft and hard wood

PROCUT Construction screw with countersunk head and full thread 3,5x30 mm - cardboard box - 1000 pcs.

Construction screw with countersunk head and full thread

Hardened chipboard screw TX, zinc plated TS 3,0x30 mm - cardboard box - 500 pcs.

Hardened screws for new generation wood composites and timber

Chipboard and wood screw with hardened countersunk head 3,0x30 mm - cardboard box - 1000 pcs.

For wood applications

Installation guide

Installation manual

Installation step by step

1

Put the nail to the ground.

2

Use a hammer to hammer it into the ground until it is flush with the head.

3

Correctly mounted element in the wooden substrate.

Approvals and publications

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF