R-S1-RBL-M10/25/2
5906675094274
For use in cracked and uncracked concrete
Define product parameters:
Unit pack
5.00 pack
Bulk pack
25.00 pack
Pallet
2200.00 pack
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
For use in cracked and uncracked concrete
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
E-learning training
Designing
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Insert the anchor (tap home until flush with surface) and position hook accordingly.
Insert the screw with the washer through the fastened element to the sleeve placed in the hole. Using a torque wrench, tighten the nut to the required torque.
The anchor is properly fixed in the concrete base.