1. Mainpage
  2. R-RPB Rawlbolt Shield Anchor, Projection Head, M8 x 75mm - plastic bag - 2 pcs.

R-RPB Rawlbolt Shield Anchor, Projection Head, M8 x 75mm - plastic bag - 2 pcs.

Solid walls
Outlet

R-S1-RBP2-M8/60/2

5010445449536

Rawlplug

For use in hollow core slab and ceramic substrates

Define product parameters:

Diameter
Maximum thickness of the mounted element
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    5.00 pack

  • Bulk pack

    20.00 pack

  • Pallet

    1760.00 pack

Features

For use in hollow core slab and ceramic substrates

  • Wide range of diameters (M6 to M20).
  • Three-pieces expanding sleeve of maximum expansion provides optimal load and safety of use in any substrate.
  • For use in cracked and non-cracked concrete (ETA option 1), hollow-core slabs, flooring blocks and ceramics.

Substrates

Cracked concrete C20/25-C50/60

Cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Unreinforced concrete

Unreinforced concrete

Reinforced concrete

Reinforced concrete

Hollow-core slab C20/25

Hollow-core slab C20/25

Hollow-core slab C30/37-C50/60

Hollow-core slab C30/37-C50/60

Solid clay brick ≥ 20MPa

Solid clay brick ≥ 20MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

High-density natural stone

High-density natural stone

Hollow-core slab C20/25

Hollow-core slab C20/25

Hollow-core slab C30/37-C50/60

Hollow-core slab C30/37-C50/60

Solid clay brick ≥ 20MPa

Solid clay brick ≥ 20MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

Approved surfaces

Applications

Barriers

Doors and windows

Gates

Repair of machinery

Sanitary and gas installations

Steel structures

Services

Technical library

Technical library

Technical Support

Technical Support

Webinars

Webinars

Traditional training

Traditional training

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Blow out the dust at least 4 times with the hand pump.

3

Remove nut and washer and insert anchor into hole. Tap home with hammer until flush with surface.

4

Add washer and nut and tighten to recommended torque.

5

The anchor is properly fixed in the concrete base.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

KDWU-2020-1231-1-R-RB

DoP-11/0141 RP-30

Product card and catalogues

Choose product card:

Product cart

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF