1. Mainpage
  2. R-STUDS Threaded Rod M8 x 110mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

R-STUDS Threaded Rod M8 x 110mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Universal

R-STUDS-08110

5906675127477

Rawlplug

Threaded rod made of class 5.8 steel for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    10.00 pcs.0.42 kg

  • Bulk pack

    500.00 pcs.21.56 kg

  • Pallet

    4000.00 pcs.

Related products

Aggressor SDS Plus drill bits 10x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rawlplug SDS Plus Rebar Drill Bit 10 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Aggressor SDS Plus drill bits 10x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Rawlplug SDS Plus Rebar Drill Bit 10 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Features

Threaded rod made of class 5.8 steel for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance.
  • Suitable for use with special mesh sleeves in hollow substrates.
  • Can be post-installed through fixture in some cases. (Consult technical advisory service).
  • Possibility of removal when used with internally threaded socket.
  • Hexagonal head for convenient use with torque wrench.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Blinds and awnings

Boilers

Ceiling mounts

Elevators and escalators

Glass facades

Pipelines

Poles and road signs

Seats in public facilities

Steel structures

Tunnels

Ventilated facades

Substitutes

R-STUDS Threaded Rod M8 x 110mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M8 x 110mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 8x110mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

R-STUDS Threaded Rod M8 x 110mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M8 x 110mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 8x110mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

EasyFix

EasyFix

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Approvals and publications

Product card and catalogues

Choose product card:

Product card R-STUDS Metric Threaded Rods - Steel Class 1.4529 HCR, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A4

Product card R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A2, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Zinc Flake, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake, Flat Head

Choose product catalog:

Specification Design Guide

General catalogue - PDF