FERC logos
  1. Mainpage
  2. Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 12x160mm - cardboard box - 10 pcs.

Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 12x160mm - cardboard box - 10 pcs.

Universal

R-STUDS-12160-88HD

5906675153773

Rawlplug

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity

This product has been withdrawn from sale.

Features

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance.
  • Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions.
  • Can be post-installed through fixture in some cases. (Consult technical advisory service).
  • Suitable for use with special mesh sleeves in hollow substrates.
  • Hexagonal head for convenient use with torque wrench.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Full list of variations

Substitutes

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Services

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Installation data

Approvals and publications

Catalogues and product cards

(11)

Product cards(8)

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27

Download