R-TFIX-TOOL-RED
5906675412245
TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8S
Define product parameters:
Unit pack
1.00 pcs.0.08 kg
Bulk pack
16.00 pcs.1.63 kg
Pallet
384.00 pcs.39.17 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
TX40 Setting tool with integrated disc for surface installation of screw-in fixing R-TFIX-8S
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
Technical Support 2
Rawlplug Academy
Drill a hole to the required diameter and depth for rebar size being used.
Clean drilled hole 3 times.
Place the T40 mounting tip in the recess of the plastic part of the R-TFIX-8S screw, insert the pin into the drilled hole.
When tightening, press the tip, keeping it precisely perpendicular to the elevation.
Tighten the plug screw until the appropriate embedding depth is reached (the plate should be on the surface with a thermal insulation layer).
Correctly installed R-TFIX-8S.
