1. Mainpage
  2. R-WCS Screw For Concrete, Hex Head 6.3 x 35mm, Zinc Flake Coating - cardboard box - 250 pcs.

R-WCS Screw For Concrete, Hex Head 6.3 x 35mm, Zinc Flake Coating - cardboard box - 250 pcs.

Solid walls

R-WCS-63035

5906675103860

Rawlplug

Shape and type of the thread specially design to allow connecting to concrete

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    250.00 pcs.1.52 kg

  • Bulk pack

    4000.00 pcs.24.70 kg

  • Pallet

    96000.00 pcs.592.82 kg

Related products

Rawlplug SDS Plus Rebar Drill Bit 5.0 x 100 x 160mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rawlplug SDS Plus Rebar Drill Bit 5.0 x 100 x 160mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Features

Shape and type of the thread specially design to allow connecting to concrete

  • Hardened thread surface.
  • High quality anti-corrosion coating guarantees resistance of 15 Kesternich cycles.
  • The shape and type of screw's thread is designed specifically for trapezoid sheet substrate.
  • Sharp point of the drill prevents movement of the surface of the fixture.

Substrates

Concrete

Concrete

Concrete slab

Concrete slab

Approved surfaces

Applications

Flat roofs

Substitutes

R-WBT Screws for concrete and timber T25 6.1x50 mm zinc flak coating - cardboard box - 100 pcs.

Screw for concrete substrates TX25 head. Shape and type of the thread specially design to allow connecting to concrete and wood.

R-WBT Screws for concrete and timber T25 6.1x50 mm zinc flak coating - cardboard box - 100 pcs.

Screw for concrete substrates TX25 head. Shape and type of the thread specially design to allow connecting to concrete and wood.

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

EasyFix

EasyFix

Technical library

Technical library

Installation guide

Installation manual

Installation step by step

1

Drill a hole of the appropriate diameter and depth in the concrete substrate.

2

Drill a hole of the appropriate diameter and depth. Place the POK washer on the insulating material and use the WCS screw.

3

Using a screwdriver, screw the POK+WCS connector into the substrate until the appropriate depth is achieved.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ETA-23/0198

1488-CPR-0697/Z

DoP-23/0198-R-GOK-II

UKTA-0836-22/6338

UKTA-DoP-22/6338-R-WCS

KOT-2017-0158

020-UWB-0848/Z

TC-4765-15_OLD

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF