R-XPT-HD-20160/20
5906675234229
Define product parameters:
Unit pack
25.00 pcs.10.32 kg
Bulk pack
25.00 pcs.10.32 kg
Pallet
2000.00 pcs.825.52 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Hot Dip Galvanized throughbolt for non-cracked concrete
rawlplug_rxpt_throughb
Approved surfaces
Diameter | Length | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|
| 20 mm | 200 mm | Cardboard box | 10 | R-XPT-HD-20200/60 | 5906675234236 | Contact with us and check out our terms of cooperation |
| 20 mm | 160 mm | Cardboard box | 25 | R-XPT-HD-20160/20 | 5906675234229 | Contact with us and check out our terms of cooperation |
| 20 mm | 125 mm | Cardboard box | 25 | R-XPT-HD-20125/5 | 5906675234212 | Contact with us and check out our terms of cooperation |
| 24 mm | 260 mm | Cardboard box | 10 | R-XPT-HD-24260/100 | 5906675249742 | Contact with us and check out our terms of cooperation |
| 12 mm | 135 mm | Cardboard box | 50 | R-XPT-HD-12135/40 | 5906675277929 | Contact with us and check out our terms of cooperation |
| 8 mm | 60 mm | Cardboard box | 100 | R-XPT-HD-08060/10 | 5906675234007 | Contact with us and check out our terms of cooperation |
| 8 mm | 140 mm | Cardboard box | 100 | R-XPT-HD-08140/75 | 5906675234045 | Contact with us and check out our terms of cooperation |
| 8 mm | 115 mm | Cardboard box | 100 | R-XPT-HD-08115/50 | 5906675234038 | Contact with us and check out our terms of cooperation |
| 16 mm | 140 mm | Cardboard box | 25 | R-XPT-HD-16140/20 | 5906675277943 | Contact with us and check out our terms of cooperation |
| 10 mm | 65 mm | Cardboard box | 50 | R-XPT-HD-10065/5 | 5906675234052 | Contact with us and check out our terms of cooperation |
Design Consulting
Training at the Rawlplug Academy center
Rawlplug Academy
Technical Support 2
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached.
Using a torque wrench, tighten the nut to the required torque.
The anchor is properly fixed in the concrete base.
(3)
(1)