R-XPTIIIHD12125/30
5906675503431
Define product parameters:
Unit pack
50.00 pcs.2.86 kg
Bulk pack
50.00 pcs.2.86 kg
Pallet
19600.00 pcs.1121.32 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Hot Dip Galvanized throughbolt for non-cracked concrete
Approved surfaces
Diameter | Length | Coating | Type of package | Pieces. per pack. | Index | EAN | |
|---|---|---|---|---|---|---|---|
| 16 mm | 125 mm | HDG - hot-dip galvanized | Cardboard box | 25 | R-XPTIIIHD16125/5 | 5906675503486 | Contact with us and check out our terms of cooperation |
| 16 mm | 150 mm | HDG - hot-dip galvanized | Cardboard box | 25 | R-XPTIIIHD16150/30 | 5906675503509 | Contact with us and check out our terms of cooperation |
| 12 mm | 150 mm | HDG - hot-dip galvanized | Cardboard box | 50 | R-XPTIIIHD12150/55 | 5906675503455 | Contact with us and check out our terms of cooperation |
| 12 mm | 120 mm | HDG - hot-dip galvanized | Cardboard box | 50 | R-XPTIIIHD12120/25 | 5906675503424 | Contact with us and check out our terms of cooperation |
| 12 mm | 100 mm | HDG - hot-dip galvanized | Cardboard box | 50 | R-XPTIIIHD12100/5 | 5906675503417 | Contact with us and check out our terms of cooperation |
| 16 mm | 180 mm | HDG - hot-dip galvanized | Cardboard box | 25 | R-XPTIIIHD16180/60 | 5906675503516 | Contact with us and check out our terms of cooperation |
| 12 mm | 125 mm | HDG - hot-dip galvanized | Cardboard box | 50 | R-XPTIIIHD12125/30 | 5906675503431 | Contact with us and check out our terms of cooperation |
| 16 mm | 220 mm | HDG - hot-dip galvanized | Cardboard box | 25 | R-XPTIIIHD16220100 | 5906675503523 | Contact with us and check out our terms of cooperation |
| 16 mm | 105 mm | HDG - hot-dip galvanized | Cardboard box | 25 | R-XPTIIIHD16105/5 | 5906675516950 | Contact with us and check out our terms of cooperation |
| 10 mm | 95 mm | HDG - hot-dip galvanized | Cardboard box | 50 | R-XPTIIIHD10095/25 | 5906675503370 | Contact with us and check out our terms of cooperation |
Technical library
Training at the Rawlplug Academy center
EasyFix
Construction site tests
Drill the hole to the appropriate depth
Remove the drill bits and clean the hole thoroughly using a pump
Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached
Insert the anchor into the hole through the fastening element and tap it with a hammer to the appropriate depth
Tighten to the recommended torque
The anchor is correctly installed
(3)
(3)