1. Mainpage
  2. SP-CE Wire Mesh Sleeve M20 x 1000mm - cardboard box - 1 pc.

SP-CE Wire Mesh Sleeve M20 x 1000mm - cardboard box - 1 pc.

Universal

SP-CE-R20

5906675610726

Rawlplug

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

Define product parameters:

Diameter
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    5.00 pcs.0.60 kg

  • Bulk pack

    5.00 pcs.0.60 kg

  • Pallet

    750.00 pcs.90.00 kg

Related products

R-STUDS Threaded Rod M20 x 260mm, Hex Head, A4 Stainless Steel - cardboard box - 5 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

R-STUDS Threaded Rod M20 x 260mm, Hex Head, Class 8.8 - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

R-STUDS Threaded Rod M20 x 260mm, Hex Head, A4 Stainless Steel - cardboard box - 5 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

R-STUDS Threaded Rod M20 x 260mm, Hex Head, Class 8.8 - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Features

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

  • Reduces consumption of resin and holds threaded rod in position.
  • Dedicated for deep anchorage.
  • Optimal mechanical interlock.
  • Necessary for use in copy-eco system - reinforcement of suspension rod in large-panel construction systems.

Substrates

Hollow brick

Hollow brick

Clay block

Clay block

Aerated concrete block

Aerated concrete block

Hollow block

Hollow block

Approved surfaces

Applications

Anchoring glued in with threaded rods

Anchoring glued in with reinforcing bars

Substitutes

Steel mesh sleeve 10mm 1 m for M8 rod - cardboard box - 10 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M10 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M12 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M16 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

Steel mesh sleeve 10mm 1 m for M8 rod - cardboard box - 10 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M10 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M12 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

SP-CE Wire Mesh Sleeve M16 x 1000mm - cardboard box - 1 pcs.

Metal mesh with galvanized coating for use with bonded anchors in hollow substrates and for the reinforcement system of large slabs

Services

Design Consulting

Design Consulting

E-learning training

E-learning training

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Design Consulting

Design Consulting

Installation guide

Installation manual

Installation step by step

1

Prepare the hole by drilling and appropriate cleaning (depending on the substrate)._x000D_ Place the mesh in the prepared hole..

2

Dispense the resin mix.

3

Seat the rod.

4

Apply the curing time given on the label of bonded anchor.

5

After full curing of the resin complete the installation using torque indicated in proper ETA assesment.

6

Correct installation of the chemical anchor with the SP-CE mesh.

Approvals and publications

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF