Solid walls
R-HLX-10X120-HF-ZF
5906675533858
Define product parameters:
Diameter
Length
Coating
Packaging and quantity
Weight and bulk packaging
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Features
Induction hardened concrete screw anchor with hex head
- The new thread geometry with additional cutting teeth ensures quick and easy installation, also in reinforced concrete C20/25 - C50/60.
- Fire resistance R30-R120.
- R-HLX concrete screws can be used in earthquake-prone zones - seismic category C1 and C2.
- Special anti-corrosion zinc flake coating for increased corrosion resistance.
- Possibility of installation near the edge of concrete and at short distances from adjacent screws.
- Polish production guarantees the highest precision of workmanship and its repeatability.
- Possibility of disassembly and repeated use after verifying thread wear with a tester.
- The highest parameters in cracked and uncracked concrete C20/25 - C50/60 confirmed in the ETA.
- Induction hardening ensures high surface hardness and high core impact strength.
Approved surfaces
Diameter | Length | Coating | Packaging and quantity | Index | EAN | Catalog price for PAC. net |
|---|
Installation manual
Installation step by step
1
Drill the hole with a hammer drill (1a) ) to the required depth according to the table
2
Clean the hole (blow dust at least 4 times with the hand pump). When using a dust-free drill bit (1b), it is not necessary to clean the hole..
3
Screw the concrete screw into the hole with an impact wrench and a suitable impact socket. Tighten until the fixture is clamped to the substrate. Installation with any tangential impact wrench. Finish screwing when the screw head touches the fastened element/substrate. The screw head must not be damaged
4
Possibility to unscrew the fixed anchor to a maximum height of 10mm. In the adjustment process, the permissible thickness of the fastened elements (Tfix) must be observed
5
Finish screwing when the anchor touches the fastened element. The adjustment operation can be performed twice
Installation data
Technical library
(11)
Technical assessments(2)
Declarations(2)
Certificates(4)
Documents(3)
Catalogues and product cards
(6)