1. Mainpage
  2. KI-10M Hammer-in Facade fixing with metal pin 10/220 mm - cardboard box - 250 pcs.

KI-10M Hammer-in Facade fixing with metal pin 10/220 mm - cardboard box - 250 pcs.

Universal

VSU-KI-220M

5906675009605

Koelner

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

Define product parameters:

Length
Packaging and quantity

Features

Hammer-in facade fixing with steel nail for countersunk installation with additional insulation cap

  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
  • Installation in all base materials (categories A,B,C,D,E)
  • Expansion zone designed for low embedment depths, reducing the amount of drilling required.
  • Fixing recommend for countersunk installation (with post-installed insulation cap) reduces heat transmission and results in a homogenous insulation surface
  • Plate stiffness (value 0.4 kN/mm) ensures smooth elevation surface and stable insulation system.
  • Steel nail allows fast and trouble-free installation with correct expansion of the plug.
  • Optimal product parameters enable cost-saving solutions.

Substrates

Concrete C20/25-C50/60

Concrete C20/25-C50/60

Hollow-core slab

Hollow-core slab

Aerated concrete

Aerated concrete

Solid brick

Solid brick

Lightweight concrete block

Lightweight concrete block

Solid sand-lime brick

Solid sand-lime brick

Hollow lightweight concrete block

Hollow lightweight concrete block

Hollow sand-lime brick

Hollow sand-lime brick

Reinforced components of lightweight aggregate concrete

Reinforced components of lightweight aggregate concrete

Approved surfaces

Applications

Facades - thermal insulation systems

Services

Design Consulting

Design Consulting

EasyFix

EasyFix

E-learning training

E-learning training

Learn more
Rawlplug Academy

Rawlplug Academy

Installation guide

Installation manual

Installation step by step

1

Cut the hole in insulation board.

2

Drill a hole of appropriate diameter and depth.

3

Hammer the steel nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 25 mm in base materials category A, B, C (concrete, solid and perforated bricks), 40 mm in base materials category D (lightweight concrete blocks) and 60 mm in aerated concrete.

4

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

5

Proper recessed installation.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

ETA-07/0291

1488-CPR-0368/Z

DoP-07/0291 KI-10M

KOT-2021/1550

020_UWB-1064/Z

KDWU-2021/1550-1_KI_10M

UKTA-22/6369

UKTA-DoP-22/6369-KI-10M

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2024 Koelner Rawlplug IP