Zinc plated Pan-Head concrete screw anchor R-LX-P-ZP 6x40 mm - plastic bag - 10 pcs.
R-S3-LXP06040Z/10
5906675468235
Define product parameters:
Contact with us and check out our terms of cooperation
R-S3-LXP06040Z/10
5906675468235
Define product parameters:
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Aggressor SDS Plus drill bits 6x100x160 mm - plastic hanger - 1 pc.
Aggressor SDS Plus drill bits 6x50x110 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 6x100x160 mm - plastic hanger - 1 pc.
Rebardrill SDS Plus drill bits 6x50x110 mm - plastic hanger - 1 pc.
18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.
18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.
Impact bits Torx T30, 25 mm - plastic box - 20 pcs.
Pump for blowing drill cuttings - plastic bag - 1 pc.
R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.
Brickdrill SDS PLUS non-impact drill bits 6.0x260 m - plastic hanger - 1 pc.
10mm 1/2" Cr-Mo Impact Socket 78mm L - plastic hanger - 1 pc.
Self-tapping concrete screwbolt
Rawlplug R-LX mechanical concrete screw anchor - tutorial and principle of operation
Mechanical concrete screw anchor – Rawlplug's instruction
Cracked concrete C20/25-C50/60
Non-cracked concrete C20/25-C50/60
Unreinforced concrete
Reinforced concrete
Hollow-core slab C30/37-C50/60
High-density natural stone
Cracked concrete C20/25-C50/60
Non-cracked concrete C20/25-C50/60
Unreinforced concrete
Reinforced concrete
Approved surfaces
Balustrades
Concrete structures
Formwork
Gates
Scaffolding
Seats in public facilities
Storage racks
Temporary fixings
Design Consulting
Training at the Rawlplug Academy center
EasyFix
Technical library
Drill a hole to the required diameter and depth for rebar size being used.
Blow out the dust at least 4 times with the hand pump.
Tighten to specified installation torque.
After installation a further turning of the screw must not be possible. The head of the screw must be in contact with the substrate and is not damaged.
Mechanical anchors - general characteristics and application - E-LEARNING
Mechanical anchors - product characteristics - R-LX - E-LEARNING
Mechanical anchors - introduction and correct installation of anchors - ON-SITE TRAINING
Mechanical anchors - Rawlplug's offer - ON-SITE TRAINING
R-LX - screw anchor - ON-SITE TRAINING
Mechanical anchors - introduction and correct installation of anchors - TRAINING CENTER
Mechanical anchors - Rawlplug's offer - TRAINING CENTER
R-LX - screw anchor - TRAINING CENTER
Mechanical anchors - introduction and correct installation of anchors - WEBINAR
Mechanical anchors - Rawlplug's offer - WEBINAR
R-LX - screw anchor - WEBINAR
Road and bridge fixings design calculation - SERVICE
Concrete fixings design calculation - SERVICE
Masonry fixings design calculation - SERVICE
Mechanical anchors on-site test - SERVICE