FERC logos
  1. Mainpage
  2. TS Construction screw for timber with countersunk head 5x70 mm - blister - 8 pcs.

Timber
New

B-TS-5070

5906675492087

Koelner

Hardened screws for new generation wood composites and timber

Define product parameters:

Diameter
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    8.00 bl0.48 kg

  • Bulk pack

    8.00 bl0.48 kg

  • Pallet

    1872.00 bl112.32 kg

Related products

18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Torsion Torx25 T25 bits, 25 mm - blister - 3 pcs.

Adapter with quick-change bits 60 mm - plastic box - 1 pc.

Bit adapter with 2 magnets 60 mm - plastic box - 1 pcs.

18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Torsion Torx25 T25 bits, 25 mm - blister - 3 pcs.

Adapter with quick-change bits 60 mm - plastic box - 1 pc.

Bit adapter with 2 magnets 60 mm - plastic box - 1 pcs.

Features

Hardened screws for new generation wood composites and timber

  • The partial thread on the shaft of the screw allows multiple elements to be clamped together securely without separation.
  • TX drive quarantees secure transmission of screw-in torque and no pop-out of the bit.
  • Crack avoidance.
  • Underhead cutting ribs for easy countersinking and a precise flush finish.
  • Energy saving screwdriver due to the minimized torque required to fixing the screw.
  • Clean application.
  • Wide range of dimensions and surfaces.
  • Notched thread and wax coating for reduced friction.
  • Easy to screw-in.

Wood

Wood

Timber

Timber

Plywood

Plywood

Chipboard

Chipboard

Approved surfaces

Thin-walled plates

Wooden constructions

Wooden elements

Diameter
Length
Packaging and quantity
Index
EAN
Catalog price for bl. net

Chipboard and wood screw with hardened countersunk head 5,0x70 mm - cardboard box - 200 pcs.

Chipboard and wood screw with hardened countersunk head 5,0x70 mm - cardboard box - 200 pcs.

Installation manual

Installation step by step

1

Screw the screw perpendicularly to the substrate until the surface of the head is flush with the substrate.

2

Properly fastened screw to the wooden substrate.

Installation data

Technical library

(1)

Declarations(1)

DoP-EN14592-TS

Download

Catalogues and product cards

(2)

Product cards(1)

Product cart

Download
Catalogues(1)

Catalogue

Download