FERC logos
  1. Mainpage
  2. TS Construction screw for timber with countersunk head 6x60 mm - blister - 6 pcs.

TS Construction screw for timber with countersunk head 6x60 mm - blister - 6 pcs.

Timber
New

B-TS-6060

5906675492124

Koelner

Hardened screws for new generation wood composites and timber

Define product parameters:

Diameter
Length
Packaging and quantity

Related products

Torsion Torx30 T30x25 mm bits - plastic box - 20 pcs.

Long Torsion bits

18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

18V Impact driver with 210 Nm torque equipped with universal handle - inner 1/4" and external 1/2" - allows you to work with bits and caps.

Torsion Torx30 T30 bits 25 mm - blister - 3 pcs.

Long Torsion bits

Bit adapter with 2 magnets 60 mm - plastic box - 2 pcs.

Bit holder with 2 magnets precisely holds the screws during application in a variety of substrates

Adapter with quick-change bits 60 mm - plastic box - 1 pc.

Bit holder with quick bit replacement when working with large amounts of various screws

Torsion Torx30 T30x25 mm bits - plastic box - 20 pcs.

Long Torsion bits

18 V RawlWRENCH 210 Nm Impact driver, Set with RawlCASE, 2 batteries 5.0 Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

18V Impact driver with 210 Nm torque equipped with universal handle - inner 1/4" and external 1/2" - allows you to work with bits and caps.

Torsion Torx30 T30 bits 25 mm - blister - 3 pcs.

Long Torsion bits

Bit adapter with 2 magnets 60 mm - plastic box - 2 pcs.

Bit holder with 2 magnets precisely holds the screws during application in a variety of substrates

Adapter with quick-change bits 60 mm - plastic box - 1 pc.

Bit holder with quick bit replacement when working with large amounts of various screws

Features

Hardened screws for new generation wood composites and timber

  • The partial thread on the shaft of the screw allows multiple elements to be clamped together securely without separation
  • TX drive quarantees secure transmission of screw-in torque and no pop-out of the bit
  • Crack avoidance
  • Underhead cutting ribs for easy countersinking and a precise flush finish
  • Energy saving screwdriver due to the minimized torque required to fixing the screw.
  • Clean application
  • Wide range of dimensions and surfaces
  • Notched thread and wax coating for reduced friction
  • Easy to screw-in

Substrates

Chipboard

Chipboard

Plywood

Plywood

Wood

Wood

Timber

Timber

Exotic wood

Exotic wood

Approved surfaces

Applications

Thin-walled plates

Wooden constructions

Wooden elements

Substitutes

UC Chipboard and wood screw with hardened countersunk head 6,0x60 mm silver - blister - 8 pcs.

For wood applications

Chipboard and wood screw with hardened countersunk head 6,0x60 mm - cardboard box - 200 pcs.

For wood applications

UC Chipboard and wood screw with hardened countersunk head 6,0x60 mm silver - blister - 8 pcs.

For wood applications

Chipboard and wood screw with hardened countersunk head 6,0x60 mm - cardboard box - 200 pcs.

For wood applications

Services

Technical Support 2

Technical Support 2

Rawlplug Academy

Rawlplug Academy

Customized packaging

Customized packaging

Rawltruck

Rawltruck

Installation guide

Installation manual

Installation step by step

1

Screw the screw perpendicularly to the substrate until the surface of the head is flush with the substrate.

2

Properly fastened screw to the wooden substrate.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

DoP-EN14592-TS

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue