FERC logos
  1. Mainpage
  2. UC Chipboard and wood screw with hardened countersunk head 3,5x16 mm silver - blister - 45 pcs.

UC Chipboard and wood screw with hardened countersunk head 3,5x16 mm silver - blister - 45 pcs.

Timber

B-UC-3516

5906675311296

Koelner

For wood applications

Define product parameters:

Diameter
Length
Colour
Packaging and quantity

Related products

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

18 V RawlDRIVER 70Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5A RawlCHARGER - plastic case - 1 pc.

Drill/driver 18V 70 Nm for screwdriving depending on the hardness of the material.

Features

For wood applications

  • Thread geometry allowing application in all wood materials
  • The optimised head geometry with underhead cutting ribs also affords an exact and splinter-free surface finish even with connections close to the edge
  • The double cone head allows flush fixing of the screw

Substrates

Chipboard

Chipboard

Wood

Wood

PVC Profile

PVC Profile

Approved surfaces

Applications

Chores

Finishing works

Furniture

Gardening

Swings

Cabinets, brackets and wall brackets

Substitutes

TS Construction screw for timber with countersunk head 3,5x16 mm - blister - 44 pcs.

Hardened screws for new generation wood composites and timber

UC Chipboard and wood screw with hardened countersunk head A2 3,5,0x16 mm - blister - 14 pcs.

For wood applications

TS Construction screw for timber with countersunk head 3,5x16 mm - blister - 44 pcs.

Hardened screws for new generation wood composites and timber

UC Chipboard and wood screw with hardened countersunk head A2 3,5,0x16 mm - blister - 14 pcs.

For wood applications

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Customized packaging

Customized packaging

Designing POS Displays

Designing POS Displays

Installation guide

Installation manual

Installation step by step

1

Drive the screw straight until the head is flush.

2

Screws with partial thread can clamp wooden parts avoiding spaces between them.

3

UC screw is correctly installed in the wooden substrate.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

DoP-EN14556 UC

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue