FERC logos
  1. Mainpage
  2. FX-N-L Nylon hammer-in fixing with countersunk head 5x50 mm - cardboard box - 5000 pcs.

FX-N-L Nylon hammer-in fixing with countersunk head 5x50 mm - cardboard box - 5000 pcs.

Solid walls

FX-N-05L050-M

5906675248455

Koelner

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

Define product parameters:

Diameter
Colour
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    5000.00 pcs.

  • Bulk pack

    5000.00 pcs.

  • Pallet

    120000.00 pcs.

We will prepare this product for you after you add it to your cart and place your order. The estimated lead time is 120 days

Features

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

  • The extensive range of product lengths and diameters with countersunk head type ensures availability of the correct fixing for every scenario.
  • Combination of PZ recess and the helical thread makes removal of the nail possible, facilitating disassembly when necessary.
  • Designed for push-through installation.
  • Rapid hammer-set installation reduces the time required and allows for cost-effective, high-volume installation.

Substrates

Concrete

Concrete

Aerated concrete

Aerated concrete

Solid brick

Solid brick

Lightweight concrete block

Lightweight concrete block

Solid sand-lime brick

Solid sand-lime brick

Hollow lightweight concrete block

Hollow lightweight concrete block

Hollow sand-lime brick

Hollow sand-lime brick

Approved surfaces

Applications

Electrical Installations

Frames, profiles, slats

Plasterboard systems

Sanitary and gas installations

Services

Design tools

Design tools

Customized packaging

Customized packaging

Designing POS Displays

Designing POS Displays

Traditional training

Traditional training

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Blow out the dust at least 4 times with the hand pump.

3

Place the screw in the sleeve through the fastened element.

4

Hammer the nail into the plastic sleeve until fixing is secure and flush with the fixture.

5

Pin is correctly fastened.

Approvals and publications

Technical library and approvals

Choose document:

ETA-12/0457

1488-CPR-0288/Z

DoP-12/0457 FX-N

UKTA-0836-22/6372

UKTA-DoP-22/6372-FX-N

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue