FERC logos
  1. Mainpage
  2. FX-N-L Quick Assembly Nylon Hammer Plug with Funnel 8x60 mm - cardboard box - 2000 pcs.

FX-N-L Quick Assembly Nylon Hammer Plug with Funnel 8x60 mm - cardboard box - 2000 pcs.

Solid walls

FX-N-08L060-M

5906675248622

Koelner

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

Define product parameters:

Diameter
Colour
Length
Packaging and quantity

Features

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

  • The extensive range of product lengths and diameters with countersunk head type ensures availability of the correct fixing for every scenario
  • Combination of PZ recess and the helical thread makes removal of the nail possible, facilitating disassembly when necessary.
  • Designed for push-through installation.
  • Rapid hammer-set installation reduces the time required and allows for cost-effective, high-volume installation.

Substrates

Concrete

Concrete

Aerated concrete

Aerated concrete

Solid brick

Solid brick

Lightweight concrete block

Lightweight concrete block

Solid sand-lime brick

Solid sand-lime brick

Hollow lightweight concrete block

Hollow lightweight concrete block

Hollow sand-lime brick

Hollow sand-lime brick

Approved surfaces

Applications

Electrical Installations

Frames, profiles, slats

Plasterboard systems

Sanitary and gas installations

Substitutes

FX-N-L Nylon hammer-in fixing with countersunk head 8x60 mm - cardboard box - 100 pcs.

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

FX-N-L Nylon hammer-in fixing with countersunk head 8x60 mm - cardboard box - 100 pcs.

The hammer fixing made from best quality nylon for fast, simple, cost-effective installations

Services

Design tools

Design tools

Customized packaging

Customized packaging

Designing POS Displays

Designing POS Displays

Traditional training

Traditional training

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Blow out the dust at least 4 times with the hand pump.

3

Place the screw in the sleeve through the fastened element.

4

Hammer the nail into the plastic sleeve until fixing is secure and flush with the fixture.

5

Pin is correctly fastened.

Approvals and publications

Technical library and approvals

Choose document:

ETA-12/0457

1488-CPR-0288/Z

DoP-12/0457 FX-N

KOT-2019/0762

020-UWB-0978/Z

KDWU-2019-0762-FX

UKTA-0836-22/6372

UKTA-DoP-22/6372-FX-N

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue