FERC logos
  1. Mainpage
  2. R-PLS Plastic sleeve 2085 - label - 1 pc.

R-PLS Plastic sleeve 2085 - label - 1 pc.

Universal

K-P3-PLS-20085-10

5906675318400

The sleeve for reduced resin consumption and optimal mechanical interlock

Define product parameters:

Diameter
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    40.00 pcs.0.33 kg

  • Bulk pack

    40.00 pcs.0.33 kg

  • Pallet

    2400.00 pcs.19.62 kg

Features

The sleeve for reduced resin consumption and optimal mechanical interlock

  • Ensures that the anchor rod is properly centred.
  • Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions.
  • Size must be adjusted to the hole depth and diameter.
  • Suitable for variable anchor embedment depths.
  • Reduces consumption of resin.
  • Ideal for manually cleaning deep holes prior to the application of a screw-in anchor.
  • Hole cleaning is not necessary.
  • Suitable for variable anchor embedment depths and even up to 2.5m.

Product video

installation_and_use_o

Substrates

Concrete C12/15-C50/60

Concrete C12/15-C50/60

Solid clay brick ≥ 20MPa

Solid clay brick ≥ 20MPa

Clay block

Clay block

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

Lightweight concrete block (C)

Lightweight concrete block (C)

Hollow lightweight concrete block (D)

Hollow lightweight concrete block (D)

Brick

Brick

Approved surfaces

Applications

Anchoring glued in with reinforcing bars

Anchoring glued in with threaded rods

Balustrades

Barriers

Blinds and awnings

Blinds / curtain rods

Brackets

Concrete structures

Drilling

Electrical Installations

Formwork

Lighting

Repair of machinery

Reinforcement of a large slab

Scaffolding

Storage racks

Ventilated facades

Poles and road signs

Full list of variations

Substitutes

R-PLS Plastic Mesh Sleeves, 20 x 85mm, PP - plastic bag - 10 pcs.

Plastic mesh sleeve for use with threaded rods in hollow substrates

R-PLS Plastic Mesh Sleeves, 20 x 85mm, PP - plastic bag - 10 pcs.

Plastic mesh sleeve for use with threaded rods in hollow substrates

Services

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

3

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

4

Choose extensions and brushes to the selected depth and diameter of the hole, then combine them into one set.

5

Connect the drill set with the SDS tip.

6

Before inserting anchor, clean inside of hole by commpresed air starting from the drill holle botton. Blow the hole at least twice by compressed air at minimum 6 bar.

7

Drill a hole to the required diameter and depth for rebar size being used.

8

Place the sleeve in the hole.

9

Place the threaded rod in the sleeve and wait until the resin is fully cured according to the information on the package.

10

Dispense resin 100% of the hole depth and close the sleeve plug.

11

After full curing of the anchor, install the fixed element with a proper torque.

12

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

13

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

14

Leave to solidify for the time required for the application.

15

Attach fixture and tighten the nut to the required torque.

16

Attach fixture and tighten the nut to the required torque.

Approvals and publications

Catalogues and product cards

(1)

Catalogues(1)

Catalogue

Download