FERC logos
  1. Mainpage
  2. FT Drywall screws for timber 3,5x35 mm - plastic box - 1000 pcs.

FT Drywall screws for timber 3,5x35 mm - plastic box - 1000 pcs.

Timber
New

K-SL3-FT-3535

5906675300283

Koelner

Drywall screws for fixing plasterboards to wooden structures.

Define product parameters:

Diameter
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    6.00 pack10.61 kg

  • Bulk pack

    6.00 pack10.61 kg

  • Pallet

    180.00 pack318.30 kg

Related products

RT-BIT Magnetic Bit Holder 4 x 60mm - plastic hanger - 1 pcs.

Holder for 1/4" bits with a powerful internal magnet

Torsion Phillips2 PH2 bits 25 mm - blister - 3 pcs.

Long Torsion bits

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Protective gloves with special cushions to reduce vibration when working with power tools

18 V RawlDRIVER 60Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 RawlCHARGER - plastic case - 1 pc.

18V 60Nm Cordless drill/driver

RT-BIT Magnetic Bit Holder 4 x 60mm - plastic hanger - 1 pcs.

Holder for 1/4" bits with a powerful internal magnet

Torsion Phillips2 PH2 bits 25 mm - blister - 3 pcs.

Long Torsion bits

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Protective gloves with special cushions to reduce vibration when working with power tools

18 V RawlDRIVER 60Nm Cordless drill driver, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 RawlCHARGER - plastic case - 1 pc.

18V 60Nm Cordless drill/driver

Features

Drywall screws for fixing plasterboards to wooden structures.

  • Optimised screw tip geometry - excellent drilling capability.
  • Bugle head with PH2 drive designed to finish flush with plasterboard.
  • Made of low-carbon steel phosphated to enhance anti-corrosion properties.
  • No pre-drilling required.

Substrates

Wood

Wood

Approved surfaces

Applications

Plasterboard

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support

Technical Support

Traditional training

Traditional training

Installation guide

Installation manual

Installation step by step

1

Drive the screw perpendicular to the wooden substrate.

2

Using a screwdriver, fasten the screw until the surface of the head is level with the wooden substrate.

3

The FT screw is properly fixed in the wooden substrate.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

DoP-EN14556 FT

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Catalogue