KI-090
5906675210148
Hammer-in facade fixing with reinforced plastic nail
Define product parameters:
Unit pack
250.00 pcs.3.16 kg
Bulk pack
250.00 pcs.3.16 kg
Pallet
14000.00 pcs.177.02 kg
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Hammer-in facade fixing with reinforced plastic nail
Approved surfaces
Drill a hole of required diameter and depth. Drilling depth of min 35 mm in masonry, 50 mm in perforated materials and 70 mm in lightweight concrete block and aerated concrete.
Blow out dust at least 4 times with a hand pump.
Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.
Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 25 mm in masonry, 40 mm in perforated materials and 60 mm in lightweight concrete block and aerated concrete.
In soft insulation panels the fixing should be combined with insulation retaining plates KWL 90, 110, 140 mm.
