FERC logos
  1. Mainpage
  2. MBASS Metal Insulation Fixing 8 x 140mm, Stainless Steel, Class A1 Fire Rating - cardboard box - 250 pcs.

Universal
Outlet

MBA-SS-08140

5906675049908

Fire-resistant metal insulation fixing

Download model Perform the calculations

Define product parameters:

Material type
Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    250.00 pcs.5.60 kg

  • Bulk pack

    250.00 pcs.5.60 kg

  • Pallet

    9000.00 pcs.

This product has been withdrawn from sale.

Features

Fire-resistant metal insulation fixing

  • Accessory spreader plate, MKC-SS (85mm diameter) also available for installation of soft insulation materials such as mineral wool.
  • Metal facade fixing, recommended for use when fire resistance (F120) is a requirement.
  • Extensive dimensional range allows anchorage of insulation boards up to 250mm thick.
  • Fast and simple hammer-set installation reduces working times.
  • Stainless steel material for high corrosion resistance.

R_MBA_monta_zag__bionywwe_niemineralnej

R_MBA_monta_powierzchniowywwe_niemineralnej

Krok_po_kroku_jak_montowac_kolki_fasadowe_z_trzpieniem_wbijanym

Concrete C20/25-C50/60 (A)

Concrete C20/25-C50/60 (A)

Solid brick (B)

Solid brick (B)

Solid sand-lime brick (B)

Solid sand-lime brick (B)

Ceramic hollow block

Ceramic hollow block

Aerated concrete

Aerated concrete

Aerated concrete block (D)

Aerated concrete block (D)

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Approved surfaces

Facades - thermal insulation systems

Material type
Length
Packaging and quantity
Index
EAN
Catalog price for pack. net

Installation manual

Installation step by step

1

Drill hole to the required diameter and depth for rebar size being usee

2

Blow out dust at least 3 times with a hand pump.

3

Gently drive the MBA steel connector (with MKI plate) into the hole until the connector is anchored to the correct depth.

4

Correctly installed steel facade fixing.

5

Cut the hole in insulation board.

6

Drill a hole of appropriate diameter and depth.

7

Clean drilled hole 3 times.

8

Gently drive the steel dowel into the hole until the correct anchorage depth for the fastener is achieved. For soft substrates, use the MKC 85 mm steel washer.

9

Insert cap into countersunk hole in insulation board following installation of the facade fixing.

10

Correctly installed steel facade fixing.

Technical library

(3)

Technical assessments(1)

KOT_RAWLPLUG_MBA_R_MBA

Download
Declarations(1)

KDWU_2018_0721_6_MBA_FACADE_FIXINGS_PL_1_

Download
Certificates(1)

020_UWB_0702Z_PL_

Download

Catalogues and product cards

(5)

Product cards(2)

Product card

Download

Product card

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27

Download