1. Mainpage
  2. Products
  3. Anchors
  4. Chemical resin fixings
  5. Resin capsules
  6. Spin-In vinylester anchor in an ampoule R-CAS-V M8 - cardboard box - 10 pcs.

Spin-In vinylester anchor in an ampoule R-CAS-V M8 - cardboard box - 10 pcs.

Solid walls

R-CAS-V-08

5906675280189

Bonded screw anchor based on vinylester resin in an ampoule for concrete

Define product parameters:

Metric diameter
Packaging and quantity
Weight and bulk packaging
  • Unit pack

    10.00 pcs.0.17 kg

  • Bulk pack

    480.00 pcs.8.61 kg

  • Pallet

    5760.00 pcs.103.32 kg

Features

Bonded screw anchor based on vinylester resin in an ampoule for concrete

  • Easy and quick installation of the product.
  • Capsule contains precise amounts of ingredients making it a very consistent product.
  • Styrene free - virtually odourless.
  • Suitable for dry or wet non-cracked concrete.
  • Approved for use with threaded rods in non-cracked concrete.

Product video

kotwy_chemiczne_w_ampu

Substrates

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

High-density natural stone

High-density natural stone

Approved surfaces

Applications

Balustrades

Barriers

Steel structures

Storage racks

Ventilated facades

Full list of variations

Services

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Blow out dust at least 4 times with a hand pump.

3

Clean drilled hole 4 times.

4

Remove drill cuttings from the hole using the hand pump four times. These are necessary pre-installation steps.

5

Insert capsule into the hole.

6

Positioning the stud into the drilled hole. Switch on the drilling machine (simultaneous hammering and turning) and drive the stud into the drilled hole until the embedment depth is reached. Setting control: mortar excess flows out at the top of the drilled hole.

7

Leave the fixing undisturbed until the cure time elapses.

8

Attach the fixture and tighten the nut to the required torque.

9

Chemical anchor properly installed.

Installation data
Design data
SizeM8M10M12M16M20M24M30
Thread diameterd[mm]
8101216202430
Hole diameter in substrated0[mm]
10121418242835
Hole diameter in fixturedf[mm]
9121418222633
Max. installation torqueTinst[Nm]
10204080120180300
Min. hole depth in substrateh0[mm]
8595115130175215275
Min. substrate thicknesshmin[mm]
110120140155210258330
Min. edge distancecmin[mm]
4045556385105135
Min. spacingsmin[mm]
4045556385105135
Installation depthhnom[mm]
8090110125170210270
Processing and curing time
Substrate (concrete) temperature-[˚ C]
-5051015203040
Min. curing time 1)-[min]
480
(8h)
240
(4h)
150
(2,5h)
120
(2h)
90
(1,5h)
4520
Times are provided for resin temperatures (min = 5˚C; max = 25˚C) equal or the closest to base material temperature.
1) For wet condition and flooded holes, the curing time must be doubled.
SizeM8M10M12M16M20M24M30
R-STUDS Metric Threaded Rods - Steel Class 5.8
Nominal ultimate tensile strengthfuk[N/mm2]
500500500500500500500
Nominal yield strengthfyk[N/mm2]
400400400400400400400
Cross sectional area As[mm2]
36,65884,3156,7244,8352,3560,6
Elastic section modulusWel[mm3]
31,262,3109,1276,6540,2932,81872,1
Characteristic bending resistanceM0Rk,s[Nm]
1937651663245611124
Design bending resistanceM[Nm]
15,229,652132,8259,2448,8899,2
R-STUDS Metric Threaded Rods - Steel Class 8.8
Nominal ultimate tensile strengthfuk[N/mm2]
800800800800800800800
Nominal yield strengthfyk[N/mm2]
640640640640640640640
Cross sectional area As[mm2]
36,65884,3156,7244,8352,3560,6
Elastic section modulusWel[mm3]
31,262,3109,1276,6540,2932,81872,1
Characteristic bending resistanceM0Rk,s[Nm]
30601052665198981799
Design bending resistanceM[Nm]
244884212,8415,2718,41439,2
R-STUDS Metric Threaded Rods - A2/A4/HCR-50
Nominal ultimate tensile strengthfuk[N/mm2]
700700700700700700700
Nominal yield strengthfyk[N/mm2]
450450450450450450450
Cross sectional area As[mm2]
36,65884,3156,7244,8352,3560,6
Elastic section modulusWel[mm3]
31,262,3109,1276,6540,2932,81872,1
Characteristic bending resistanceM0Rk,s[Nm]
2652922334547861574
Design bending resistanceM[Nm]
16,733,359149,4291503,81009
SizeM8M10M12M16M20M24M30
UNCRACKED CONCRETE C20/25
Embedment depthhef[mm]
8090110125170210270
MEAN ULTIMATE RESISTANCE
TENSION LOAD
Metric threaded rod, grade 5.8NRu,m[kN]
18,930,544,181,9128,1179,6268,7
Metric threaded rod, grade 8.8NRu,m[kN]
30,541,464,188131,9179,6268,7
Metric threaded rod, grade A4-70NRu,m[kN]
26,341,46288131,9179,6268,7
SHEAR LOAD
Metric threaded rod, grade 5.8VRu,m[kN]
11,318,326,549,176,9110,9176,4
Metric threaded rod, grade 8.8VRu,m[kN]
18,32942,278,8123,5177,7282,2
Metric threaded rod, grade A4-70VRu,m[kN]
15,825,237,268,7107,7155,6247
CHARACTERISTIC RESISTANCE
TENSION LOAD
Metric threaded rod, grade 5.8NRk[kN]
1828,34262,8101,5134,6203,6
Metric threaded rod, grade 8.8NRk[kN]
24,128,345,662,8101,5134,6203,6
Metric threaded rod, grade A4-70NRk[kN]
24,128,345,662,8101,5134,6203,6
SHEAR LOAD
Metric threaded rod, grade 5.8VRk[kN]
91421396188140
Metric threaded rod, grade 8.8VRk[kN]
14,623,233,762,797,9140,9224,2
Metric threaded rod, grade A4-70VRk[kN]
12,820,329,554,885,7123,3196,2
DESIGN RESISTANCE
TENSION LOAD
Metric threaded rod, grade 5.8NRd[kN]
1215,725,334,956,474,8113,1
Metric threaded rod, grade 8.8NRd[kN]
13,415,725,334,956,474,8113,1
Metric threaded rod, grade A4-70NRd[kN]
13,415,725,334,956,474,8113,1
SHEAR LOAD
Metric threaded rod, grade 5.8VRd[kN]
7,211,216,831,248,870,4112
Metric threaded rod, grade 8.8VRd[kN]
11,718,62750,178,3112,7179,4
Metric threaded rod, grade A4-70VRd[kN]
8,21318,935,154,979,1125,8
RECOMMENDED LOAD
TENSION LOAD
Metric threaded rod, grade 5.8Nrec[kN]
8,611,218,124,940,353,480,8
Metric threaded rod, grade 8.8Nrec[kN]
9,611,218,124,940,353,480,8
Metric threaded rod, grade A4-70Nrec[kN]
9,511,218,124,940,353,480,8
SHEAR LOAD
Metric threaded rod, grade 5.8Vrec[kN]
5,181222,334,950,380
Metric threaded rod, grade 8.8Vrec[kN]
8,413,319,335,85680,5128,1
Metric threaded rod, grade A4-70Vrec[kN]
5,99,313,525,139,256,589,8
SizeM8M10M12M16M20M24M30
TENSION LOAD
STEEL FAILURE; STEEL CLASS 5.8
Characteristic resistanceNRk,s[kN]
18294278122176280
Partial safety factorγMS[-]
1,51,51,51,51,51,51,5
STEEL FAILURE; STEEL CLASS 8.8
Characteristic resistanceNRk,s[kN]
294667126196282449
Partial safety factorγMS[-]
1,51,51,51,51,51,51,5
STEEL FAILURE; STEEL GRADE A4-70
Characteristic resistanceNRk,s[kN]
264159110171247393
Partial safety factorγMS[-]
1,871,871,871,871,871,871,87
COMBINED PULL-OUT AND CONCRETE CONE FAILURE; WORKING LIFE OF 50 YEARS
NON-CRACKED CONCRETE C20/25
Characteristic bond resistance (40°C/24°C)τRk[N/mm2]
121011109,58,58
Characteristic bond resistance (80°C/50°C)τRk[N/mm2]
121011109,58,58
FACTORS
Increasing factors for concrete C30/37Ψc[-]
1,041,041,041,041,0411
Increasing factors for concrete C40/50Ψc[-]
1,071,071,071,071,0711
Increasing factors for concrete C50/60Ψc[-]
1,091,091,091,091,0911
Factor of the influence of sustained load (40°C/24°C)Ψ0sus[-]
0,660,660,660,660,660,660,66
Factor of the influence of sustained load (80°C/50°C)Ψ0sus[-]
0,60,60,60,60,60,60,6
Installation safety factorγinst[-]
1,21,21,21,21,21,21,2
CONCRETE CONE FAILURE
Factor for uncracked concretekucr,N[-]
11111111111111
Edge distanceccr,N[mm]
1)1)1)1)1)1)1)
Spacingscr,N[mm]
2)2)2)2)2)2)2)
Installation safety factorγinst[-]
1,21,21,21,21,21,21,2
CONCRETE SPLITTING FAILURE
Edge distanceccr,sp[mm]
3)3)3)3)3)3)3)
Spacingscr,sp[mm]
4)4)4)4)4)4)4)
Installation safety factorγinst[-]
1,21,21,21,21,21,21,2
SHEAR LOAD
STEEL FAILURE; STEEL CLASS 5.8
Characteristic resistance without lever armVRk,s[kN]
91421396188140
Ductility factork7[-]
1111111
Characteristic resistance with lever armMRk,s[Nm]
1937651663245611124
Partial safety factorγMS[-]
1,251,251,251,251,251,251,25
STEEL FAILURE; STEEL CLASS 8.8
Characteristic resistance without lever armVRk,s[kN]
1523346398141224
Ductility factork7[-]
1111111
Characteristic resistance with lever armMRk,s[Nm]
30601052665198981799
Partial safety factorγMS[-]
1,251,251,251,251,251,251,25
STEEL FAILURE; STEEL GRADE A4-70
Characteristic resistance without lever armVRk,s[kN]
1320295586124196
Ductility factork7[-]
1111111
Characteristic resistance with lever armMRk,s[Nm]
2652922334547861574
Partial safety factorγMS[-]
1,561,561,561,561,561,561,56
CONCRETE PRY-OUT FAILURE
Factork[-]
2222222
Installation safety factorγ2[-]
1111111
CONCRETE EDGE FAILURE
Anchor diameterdnom[mm]
8101216202430
Effective embedment depthhef[mm]
5)5)5)5)5)5)6)
Installation safety factorγinst[-]
1111111
1)ccr,N=1,5 · hef
2)scr,N=3,0 · hef
3)ccr,sp= based on relevant ETA
4)scr,sp=2,0 · ccr,sp
5)lf=max (hef ; ≤ 12 · dnom)
6)lf=max (hef; 8 · dnom;300)

Approvals and publications

Technical library

(9)

Technical assessments(3)

ETA-10-0108 (2024-06-28) - Uncracked concrete

R-CAS-V - Bonded anchor for use in uncracked concrete

UKTA-0836-22/6099

UKTA-0836-22/6099

KOT_2018_0134

IBDiM-KOT-2018/0134w2

Declarations(2)

UKTA-DoP-22/6099-R-CAS-V

UKTA-DoP-22/6099

KDWU_2018_0134_1

KDWU-2018-0134-2-SYSTEM RAWLPLUG

Certificates(2)

1488-CPR-0520/W

CPR

UWB_IBDiM_KOT_2018_0134w2_2018_04_18_2023_07_10_

020-UWB-3059/W

Documents(2)

DoP_10_0108_R_CAS_V_11_10_2024

R_CAS_V_EN_

Catalogues and product cards

(4)

Product cards(1)

Product card

Catalogues(3)

Catalogue Offer (overview) - EN

Specification Design Guide

General Catalogue EN 2026/27

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2026 Koelner Rawlplug IP