Punch tool for frame mounts FF1 M10 with holder - label - 1 pc.
Solid walls
New
R-FF1-PT-II-10
5906675514697
Tool for making holes for FF1 M10 frame dowels in aerated concrete
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Related products
Features
Tool for making holes for FF1 M10 frame dowels in aerated concrete
- The use of a punch tool helps to increase the load-bearing capacity of aerated concrete.
- Using a punch tool, a hole can be made surrounded and reinforced with compacted aerated concrete. This results in a high load capacity under the action of pulling forces.
- Using a punch tool, a hole can be made surrounded and reinforced with compacted aerated concrete. This results in a high load capacity under the action of pulling forces.
Substrates
Approved surfaces
Applications
Substitutes
Services
Design Consulting
Technical Support 2
Design tools
Training at the Rawlplug Academy center
Installation guide
Installation manual
Installation step by step
1
Use a punch tool for making the hole.
2
With a hammer, lightly tap the plug through the fixture into hole until fixing depth is reached.
3
Tighten the FF1