FERC logos
  1. Mainpage
  2. Universal bonded anchor R-KF2 summer version - plastic cartouche - 300 ml

Universal

R-KF2-300-S

5906675641652

Rawlplug

Universal bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Define product parameters:

Bonded anchors version
Resin color
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    10.00 pcs.5.82 kg

  • Bulk pack

    10.00 pcs.5.82 kg

  • Pallet

    840.00 pcs.487.20 kg

We will prepare this product for you after you add it to your cart and place your order. The estimated lead time is 35 days

Related products

R-PLS Plastic Mesh Sleeves, 15 x 85mm, PP - plastic bag - 10 pcs.

Pump for blowing drill cuttings - plastic bag - 1 pc.

R-PLS Plastic Mesh Sleeves, 12 x 50mm, PP - plastic bag - 10 pcs.

R-BRUSH Metal brush for cleaning holes for M8 rods - label - 1 pc.

Brush for cleaning holes M8/10 - label - 1 pc.

R-BRUSH Steel brush for cleaning of deep holes, 12mm - plastic box - 1 pc.

Extension for R-BRUSH-TC with a handle - label - 1 pc.

Rigid extension for R-BRUSH-TC - plastic bag - 1 pc.

Extension for R-BRUSH-TC with thread - label - 1 pc.

R-PLS Plastic Mesh Sleeves, 15 x 85mm, PP - plastic bag - 10 pcs.

Pump for blowing drill cuttings - plastic bag - 1 pc.

R-PLS Plastic Mesh Sleeves, 12 x 50mm, PP - plastic bag - 10 pcs.

R-BRUSH Metal brush for cleaning holes for M8 rods - label - 1 pc.

Brush for cleaning holes M8/10 - label - 1 pc.

R-BRUSH Steel brush for cleaning of deep holes, 12mm - plastic box - 1 pc.

Extension for R-BRUSH-TC with a handle - label - 1 pc.

Rigid extension for R-BRUSH-TC - plastic bag - 1 pc.

Extension for R-BRUSH-TC with thread - label - 1 pc.

Features

Universal bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

  • The most convenient bonded anchor for general pupose use.
  • Easy dosage thanks to patented self-opening system and use of manual or electric gun.
  • Styrene free for use indoors or outdoors (low odour).
  • Product with wide spectrum of use in the medium load capacity area.
  • Available in a winter version with faster curing time. It can be used from -20°C.
  • Suitable for multiple use. Partly used product can be reused after fitting new nozzle
  • Option of use standard manual silicone gun.
  • Ideal for applications where mechanical anchors are not suitable.

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Solid brick

Solid brick

Solid sand-lime brick

Solid sand-lime brick

Hollow brick

Hollow brick

Hollow sand-lime brick

Hollow sand-lime brick

Hollow lightweight concrete block

Hollow lightweight concrete block

Solid concrete block

Solid concrete block

Aerated concrete

Aerated concrete

Reinforced concrete

Reinforced concrete

High-density natural stone

High-density natural stone

Hollow-core slab

Hollow-core slab

Approved surfaces

Blinds and awnings

Brackets

Gates

Masonry structures

Sanitary and gas installations

Steel structures

Ventilated facades

Bonded anchors version
Resin color
Packaging and quantity
Index
EAN
Catalog price for pc. net

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Blow out the dust at least 4 times with the hand pump.

3

Clean drilled hole 4 times.

4

Remove drill cuttings from the hole using the hand pump four times.

5

Unscrew the cap and screw on the resin dispensing tip.

6

Place the cartridge in the dispenser.

7

When starting dispensing from a new package, discard approximately 10-15 cm of unmixed resin.

8

Fill with resin 70% of the depth of the hole, starting from the bottom of the hole.

9

Immediately after dispensing the resin, insert the rod into the hole with a twisting motion.

10

Remove the unnecessary amount of resin that flowed from the hole and wait for the appropriate time for the resin to cure.

11

A bonded anchor with a threaded rod is correctly installed in the concrete substrate.

12

Drill a hole to the required diameter and depth for rebar size being used.

13

Hollow substrates: insert mesh sleeve into the hole.

14

Solid substrates: Insert the mixer nozzle to the bottom of the drill hole and inject resin, slowly withdrawing the nozzle as the hole is filled to 70% of its depth.

15

Immediately after dispensing the resin, insert the rod into the hole with a twisting motion.

16

Remove excess resin that has flowed out of the hole and allow the resin to set properly.

17

Attach fixture and tighten the nut to the required torque.

18

Bonded anchor with the threaded rod is properly installed.

Technical library

(8)

Technical assessments(2)

ETA-25/0543 (2025-07-22) - Masonry

Download

ETA 23/0934 (2025-04-08) - Concrete

Download
Declarations(2)

DoP-25/0543-R-KF2 (ETA-25/0543 - Masonry)

Download

DoP-23/0934-R-KF2 (ETA-23/0934 - Concrete)

Download
Certificates(2)

1020-CPR-090-064445 (ETA-25/0543 - Masonry)

Download

1020-CPR-090-064445 (ETA-23/0934 - Concrete)

Download
Documents(2)

MSDS - R-KF2, R-KF2-S, R-KF2-W, R-KF2-STONE - FOIL SYSTEM (2025-05-26)

Download

MSDS - R-KF2, R-KF2-S, R-KF2-W, R-KF2-STONE (2025-05-26)

Download

Catalogues and product cards

(7)

Product cards(4)

Product card R-KF2 version threaded rods for concrete substrate

Download

Product card R-KF2 version rebar for concrete substrate

Download

Product card R-KF2 version threaded rods for masonry substrate

Download

Product card R-KF2 version rebar for masonry substrate

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN - PDF

Download