FERC logos
  1. Mainpage
  2. KI-10 Hammer-in facade fixing with plastic pin 10x120 mm - cardboard box - 250 pcs.

KI-10 Hammer-in facade fixing with plastic pin 10x120 mm - cardboard box - 250 pcs.

Universal

R-KI-120

5906675258195

Rawlplug

Hammer-in facade fixing with reinforced plastic nail

Define product parameters:

Length
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    250.00 pcs.3.15 kg

  • Bulk pack

    250.00 pcs.3.15 kg

  • Pallet

    12000.00 pcs.151.20 kg

Related products

Insulation retaining plate R-KWL 140 mm, polyamide - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Brickdrill SDS PLUS non-impact drill bits 8.0x260 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Insulation retaining plate R-KWL 90 mm, polyamide - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Aggressor SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

KWL - 90mm Insulation Retaining PP Plate - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Dead blow hammer 0,6 kg - label - 1 pc.

Hammer with a special system that absorbs the impact energy

Counterbore plastic cutter for EPS and mineral wool KFS 63x23,5 mm - cardboard box - 1 pc.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Polystyrene cap KES - 63x20 mm white - cardboard box - 250 pcs.

Thermal insulation cap reduces heat transmission and results in a homogenous insulation surface

Insulation retaining plate R-KWL 140 mm, polyamide - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Rawlplug SDS Plus Rebar Drill Bit 8.0 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Brickdrill SDS PLUS non-impact drill bits 8.0x260 m - plastic hanger - 1 pc.

Drill bits for non-impact drilling in ceramic materials

Insulation retaining plate R-KWL 90 mm, polyamide - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Aggressor SDS Plus drill bits 8x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

KWL - 90mm Insulation Retaining PP Plate - cardboard box - 200 pcs.

Insulation retaining plate for use in combination with facade fixings from TFIX and KI ranges

Aggressor SDS Plus drill bits 8x200x260 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

18V SDS plus Cordless hammer drill "RawlHammer"

Dead blow hammer 0,6 kg - label - 1 pc.

Hammer with a special system that absorbs the impact energy

Counterbore plastic cutter for EPS and mineral wool KFS 63x23,5 mm - cardboard box - 1 pc.

Cutter accessory for counterbored installation of TFIX hammer-in facade insulation fixings

Polystyrene cap KES - 63x20 mm white - cardboard box - 250 pcs.

Thermal insulation cap reduces heat transmission and results in a homogenous insulation surface

Features

Hammer-in facade fixing with reinforced plastic nail

  • Installation in all base materials (categories A,B,C,D,E).
  • The plastic nail reduces heat transmission (value 0.0 W/K).
  • Plastic nail reinforced with glass fibre allows fast and trouble-free installation with correct expansion of the plug.
  • Expansion zone designed for low embedment depths, reducing the amount of drilling required.
  • Can be used with additional KWL insulation holding plate, available in 90, 110 and 140 mm flange sizes (recommended for soft insulation materials such as mineral wool).
  • Optimal product parameters enable cost-saving solutions.
  • Optimum plate stiffness (0,5 kN/mm), ensures stability and excellent pull-over values.

Substrates

Concrete ≥ C12/15 (Use category A)

Concrete ≥ C12/15 (Use category A)

Solid brick (B)

Solid brick (B)

Solid sand-lime brick (B)

Solid sand-lime brick (B)

Vertically-perforated clay block (C)

Vertically-perforated clay block (C)

Hollow sand-lime brick (C)

Hollow sand-lime brick (C)

Lightweight concrete block

Lightweight concrete block

Hollow lightweight concrete block (D)

Hollow lightweight concrete block (D)

Lightweight concrete

Lightweight concrete

Aerated concrete block (D)

Aerated concrete block (D)

Approved surfaces

Applications

Ventilated facades

Facades - thermal insulation systems

Full list of variations

Length
Packaging and quantity
Index
EAN
Catalog price for pack. net

Substitutes

KI-10N Long expansion zone hammer-in facade fixing with metal pin 10x120 mm - cardboard box - 250 pcs.

Hammer-in facade fixing long expansion zone 60 mm for high performance in masonry, as well as lightweight and aerated concrete

Hammer-in facade fixing with plastic pin TFIX-8P 115 mm - cardboard box - 200 pcs.

Versatile hammer-in facade fixing with plastic nail recommended for ETICS

KI-10N Long expansion zone hammer-in facade fixing with metal pin 10x120 mm - cardboard box - 250 pcs.

Hammer-in facade fixing long expansion zone 60 mm for high performance in masonry, as well as lightweight and aerated concrete

Hammer-in facade fixing with plastic pin TFIX-8P 115 mm - cardboard box - 200 pcs.

Versatile hammer-in facade fixing with plastic nail recommended for ETICS

Installation guide

Installation manual

Installation step by step

1

Drill a hole of required diameter and depth.

2

Lightly tap the plastic sleeve through the insulation material into hole with a hammer, until fixing depth is reached.

3

Lightly tap the plastic nail into the plastic sleeve until fixing is secure and flush with insulation material. Embedment depth of min 25 mm in masonry, 40 mm in perforated materials and 60 mm in lightweight concrete block and aerated concrete.

4

In soft insulation panels the fixing should be combined with insulation retaining plates KWL 90, 110, 140 mm.

Installation data

Approvals and publications

Technical library

(5)

Technical assessments(2)

ETA-07/0291 (2022-04-19)

Nailed-in plastic anchors for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download

UKTA-22/6369 (2022-11-11)

Nailed-in plastic anchors for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download
Declarations(2)

DoP-07/0291 KI-10 (ETA-07/0291)

Nailed-in plastic anchors for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download

UKTA-DoP-22/6369-KI-10 (2023-10-02)

Nailed-in plastic anchors for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download
Certificates(1)

1488-CPR-0368/Z - ETA-07/0291 (2022-04-19) / ETA-07/0221 (2022-04-12)

Nailed-in plastic anchors for fixing of external thermal insulation composite systems with rendering in concrete and masonry

Download

Catalogues and product cards

(3)

Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN - PDF

Download