FERC logos
  1. Mainpage
  2. Metric threaded rod, flat head- class 5.8 STUDS 12x160 mm - label - 1 pc.

Universal

R-P3-STUDS-12160

5906675319179

Rawlplug

Threaded rod made of class 5.8 steel for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    20.00 pcs.2.70 kg

  • Bulk pack

    20.00 pcs.2.70 kg

Related products

R-PLS Plastic Mesh Sleeves, 16 x 130mm, PP - plastic bag - 10 pcs.

Pump for blowing drill cuttings - plastic bag - 1 pc.

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

RT-IS Impact Socket CR-MO -19 x 18mm - plastic hanger - 1 pc.

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

R-PLS Plastic Mesh Sleeves, 16 x 130mm, PP - plastic bag - 10 pcs.

Pump for blowing drill cuttings - plastic bag - 1 pc.

18 V RawlHAMMER 2.0J 20mm Cordless rotary hammer drill, Set with RawlCASE, 2 batteries 5.0Ah and 6.5 A RawlCHARGER - plastic case - 1 pc.

RT-IS Impact Socket CR-MO -19 x 18mm - plastic hanger - 1 pc.

R-PGL Protective gloves for power tools 10" blue - paper hanger - 1 pc.

Features

Threaded rod made of class 5.8 steel for use with bonded anchors

  • The steel grade 5.8 provides enhanced tensile and shear strength for the rod
  • The steel grade 8.8 provides enhanced tensile and shear strength for the rod
  • Stainless steel A4 provides high corrosion resistance.
  • The higher grade of steel is required, especially when high forces are applied.
  • The galvanized coating provides sufficient protection against corrosion in dry indoor conditions.
  • The hexagonal end allows for installation using a screwdriver with capsules.
  • For use with all chemical anchors in the offer.
  • The zinc flake coating provides enhanced corrosion resistance.
  • The hot-dip galvanized coating provides increased corrosion resistance.
  • The stainless steel screw for best anti-corrosion protection and external applications.

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Index
EAN
Catalog price for pc. net

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Installation data

Catalogues and product cards

(11)

Product cards(8)

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27 - PDF

Download