1. Mainpage
  2. Rawlbolt® - Bolt Projecting with plastic ferrule R-RBL-PF 6x25 mm - cardboard box - 50 pcs.

Rawlbolt® - Bolt Projecting with plastic ferrule R-RBL-PF 6x25 mm - cardboard box - 50 pcs.

Universal
Outlet

R-RBL-PF-M06/25W

5906675380599

RawlplugRawl

Expanding shield anchor - loose bolt with plastic ferrule version

Define product parameters:

Diameter
Maximum thickness of the mounted element
Packaging and quantity

Features

Expanding shield anchor - loose bolt with plastic ferrule version

  • For use in concrete, hollowcore slabs, flooring blocks and ceramics
  • Wide range of diameters (M6 to M16)
  • Plastic ferrule simplifies installation in hollow substrates
  • Three-pieces expanding sleeve of maximum expansion provides optimal load and safety of use in any substrate

Substrates

Cracked concrete C20/25-C50/60

Cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Non-cracked concrete C20/25-C50/60

Unreinforced concrete

Unreinforced concrete

Reinforced concrete

Reinforced concrete

Hollow-core slab C20/25

Hollow-core slab C20/25

Solid clay brick ≥ 20MPa

Solid clay brick ≥ 20MPa

Concrete hollow floor block (eg. Teriva)

Concrete hollow floor block (eg. Teriva)

Hollow sand-lime brick ≥ 15MPa

Hollow sand-lime brick ≥ 15MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow lightweight concrete block LAC 5 ≥ 5MPa

Hollow-core slab C30/37-C50/60

Hollow-core slab C30/37-C50/60

High-density natural stone

High-density natural stone

Approved surfaces

Applications

Barriers

Doors and windows

Gates

Repair of machinery

Sanitary and gas installations

Steel structures

Construction work

Substitutes

Services

Design Consulting

Design Consulting

E-learning training

E-learning training

Learn more
Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

Installation guide

Installation manual

Installation step by step

1

Drill a hole to the required diameter and depth for rebar size being used.

2

Remove pre-assembled bolt and washer. Insert shield into hole and tap home with hammer until flush with surface.

3

Insert the screw with the washer through the fastened element to the sleeve placed in the hole. Using a torque wrench, tighten the nut to the required torque.

4

The anchor is properly fixed in the concrete base.

Installation data

Approvals and publications

Technical library and approvals

Choose document:

KOT-2020/1231

020-UWB-2816/W

KDWU-2020-1231-1-R-RB

Product card and catalogues

Choose product card:

Product cart

Choose product catalog:

Specification Design Guide

General catalogue - PDF

Stay up to date

Sign up for our newsletter and don't miss:

Information

on our products and services

News

on the offering and latest promotions

Reports

on events, trade shows and industry conferences

© 2025 Koelner Rawlplug IP