R-RPS-500-FR
5906675445465
Define product parameters:
Unit pack
12.00 pcs.7.24 kg
Bulk pack
12.00 pcs.7.24 kg
Pallet
840.00 pcs.
Contact with us and check out our terms of cooperation
Contact with us and check out our terms of cooperation
Universal, one-component polyurethane foam with a hose applicator
Rawlplug Academy: jak prawidłowo zamontować okno
Approved surfaces
Design Consulting
Training at the Rawlplug Academy center
E-learning training
Learn moreTechnical Support 2
Before use, make sure that the can has a positive temperature (optimal +20°C).
Application temperature from +5°C to +30°C.
Wear protective gloves. Shake the can vigorously (approx. 30 seconds) to thoroughly mix the ingredients.
Screw the applicator to the can. The working working position is "upside down".
Moisten surfaces with water prior to application.
Fill the gaps from bottom to top, in a zigzag pattern, alternating from one side to the other. Fill the gaps up to 60% of the depth, but not more than 5 cm per layer. Gaps wider than 5 cm should be filled in layers, after the previous layer has hardened. Moisten each layer with water after application using a sprayer.
