FERC logos
  1. Mainpage
  2. DRA LONG self - drill plasterboard 16x46mm with screw 4.0x40mm - plastic bag - 20 pcs.

Plasterboard
New

R-S9-DRA01L+/20

5906675563787

Rawlplug

Perfect for installation light elements to plaster substrates

Define product parameters:

Packaging and quantity
Weight and bulk packaging

  • Unit pack

    5.00 pack0.46 kg

  • Bulk pack

    15.00 pack1.59 kg

  • Pallet

    1320.00 pack140.27 kg

Features

Perfect for installation light elements to plaster substrates

  • Innovative elongated design provides quick and secure installation in double and single plasterboard, gypsum blocks, aerated concrete (density up to 2,5 Mpa).
  • Durable nylon and fibreglass blend for high load capacity.
  • Flange which comes perfectly flush with the substrate, preventing the plug from going too deep into plasterboard.
  • Integrated drill bit which eliminates the need for pre-drilling.
  • All you need to drive the plug and the screw in place is a screwdriver and one bit: PZ2.
  • Recommended use of screws with a minimum lenght of 40mm and a diameter of 3.5-4.5mm.
  • Must only be used with screws provided.

Aerated concrete block

Aerated concrete block

Plasterboard

Plasterboard

Gypsum fibreboards

Gypsum fibreboards

Approved surfaces

Decor

Lighting

Mirrors

Cabinets, brackets and wall brackets

Packaging and quantity
Index
EAN
Catalog price for pack. net

R-DRAM Metal Self-drill fixing for drywall 13x31 mm with screw 4.2x32 mm - cardboard box - 100 pcs.

TAP-IT Fixing for plasterboard 10,5x30 mm with screw 4x40 mm - cardboard box - 100 pcs.

R-SM Interset M4x32 mm - cardboard box - 100 pcs.

R-DRAM Metal Self-drill fixing for drywall 13x31 mm with screw 4.2x32 mm - cardboard box - 100 pcs.

TAP-IT Fixing for plasterboard 10,5x30 mm with screw 4x40 mm - cardboard box - 100 pcs.

R-SM Interset M4x32 mm - cardboard box - 100 pcs.

Installation manual

Installation step by step

1

Using a screwdriver, screw in the connector until the correct depth is obtained. When using a multi-speed screwdriver, select gear 1 (lower speed gear). Taking care not to drag the fastening - you can screw with sensitivity and use the clutch settings on the screwdriver.

2

Maintaining a firm pressure, screw in fixing until flush with the base material.

3

Tighten until it stops.

Catalogues and product cards

(3)

Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN 2026/27 - PDF

Download