FERC logos
  1. Mainpage
  2. Metric threaded rod, flat head, steel class 8.8, zinc flake STUDS 10x130mm - cardboard box - 10 pcs.

Metric threaded rod, flat head, steel class 8.8, zinc flake STUDS 10x130mm - cardboard box - 10 pcs.

Universal

R-STUDS-1013088ZFF

5906675472003

Rawlplug

Threaded rod made of class 8.8 steel with flake galvanization and flat head for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    10.00 pcs.

  • Bulk pack

    10.00 pcs.

This product has been withdrawn from sale.

Related products

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Rawlplug SDS Plus Rebar Drill Bit 12 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Rawlplug SDS Plus Rebar Drill Bit 12 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Polyester bonded anchor R-KEM-II winter version - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Aggressor SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Rawlplug SDS Plus Rebar Drill Bit 12 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Rawlplug SDS Plus Rebar Drill Bit 12 x 200 x 260mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

Polyester bonded anchor R-KEM-II winter version - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Aggressor SDS Plus drill bits 12x150x210 mm - plastic hanger - 1 pc.

Drill bits SDS plus for fast drilling in concrete

Features

Threaded rod made of class 8.8 steel with flake galvanization and flat head for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance.
  • Special anti-corrosion zinc flake coating for increased corrosion resistance.
  • Can be post-installed through fixture in some cases. (Consult technical advisory service).
  • Suitable for use with special mesh sleeves in hollow substrates.
  • Possibility of removal when used with internally threaded socket.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Full list of variations

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Index
EAN
Catalog price for pack. net

Substitutes

R-STUDS Threaded Rod M10 x 130mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

R-STUDS Threaded Rod M10 x 130mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M10 x 130mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel A4, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

R-STUDS Threaded Rod M10 x 130mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

R-STUDS Threaded Rod M10 x 130mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M10 x 130mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel A4, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 10x130mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Installation data

Approvals and publications

Catalogues and product cards

(11)

Product cards(8)

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN - PDF

Download