ProductsServicesSoftwareRawlplug AcademyGuidesAbout us

Mainpage
Metric threaded rod, flat head, steel class 5.8, hot dip galvanized STUDS 12x150mm - cardboard box - 10 pcs.

Metric threaded rod, flat head, steel class 5.8, hot dip galvanized STUDS 12x150mm - cardboard box - 10 pcs.

Universal

R-STUDS-12150-HDFL

5906675478364

Ask for the product

Contact with us and check out our terms of cooperation

Related products

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Pump for blowing drill cuttings - plastic bag - 1 pc.

Manual blow pump for cleaning dust from drilled holes

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Rawlplug SDS Plus Rebar Drill Bit 14 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Pump for blowing drill cuttings - plastic bag - 1 pc.

Manual blow pump for cleaning dust from drilled holes

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Rawlplug SDS Plus Rebar Drill Bit 14 x 150 x 210mm, PGM Approved - plastic hanger - 1 pc.

High-quality SDS plus drill bits for drilling in reinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Features

Threaded rod made of class 5.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Threaded rods provide high strength and good wear resistance.
Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions.
Can be post-installed through fixture in some cases. (Consult technical advisory service).

Suitable for use with special mesh sleeves in hollow substrates.
Flat head for quick manual installation without a setting tool.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Full list of variations

Diameter	Length	Rod end	Corrosion protection	Type of package	Pieces. per pack.	Index	EAN	Catalog price for pack. net

Substitutes

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 12x160mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 12x160mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel A4 STUDS 12x190mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, Class 8.8 - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

R-STUDS Threaded Rod M12 x 160mm, Hex Head, A4 Stainless Steel - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 12x160mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, zinc flake STUDS 12x160mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flake galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel A4 STUDS 12x190mm - cardboard box - 10 pcs.

Threaded rod made of A4 stainless steel with flat head for use with bonded anchors

Installation guide

Installation manual

Installation step by step

Installation data

Approvals and publications

Catalogues and product cards

(8)

Product cards(8)

Product card

Product card

Product card

Product card

Product card

Product card

Product card

Product card