FERC logos
  1. Mainpage
  2. Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Universal

R-STUDS-20300-88HD

5906675471518

Rawlplug

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    10.00 pcs.6.76 kg

  • Bulk pack

    10.00 pcs.6.76 kg

  • Pallet

    1080.00 pcs.729.86 kg

Related products

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II summer version - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Hybrid bonded anchor R-KER-II summer version - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II summer version - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Hybrid bonded anchor R-KER-II summer version - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Features

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance.
  • Threaded rod mades of carbon steel class 10.9 is suitable for outdoor use and in damp conditions.
  • Can be post-installed through fixture in some cases. (Consult technical advisory service).
  • Class 10.9 provide much more greater tensile and yield strength than the ordinary class 8.8.
  • Hexagonal head for convenient use with torque wrench.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Substitutes

R-STUDS Threaded Rod M20 x 300mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 20x300mm - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 8.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 8.8, hot dip galvanized STUDS 20x320mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 20x350mm - cardboard box - 5 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

R-STUDS Threaded Rod M20 x 300mm, Hex Head, Class 5.8 - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 20x300mm - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 5.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 8.8, hot dip galvanized STUDS 20x300mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 8.8, hot dip galvanized STUDS 20x320mm - cardboard box - 10 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization and flat head for use with bonded anchors

Metric threaded rod, flat head, steel class 5.8 STUDS 20x350mm - cardboard box - 5 pcs.

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Services

Design Consulting

Design Consulting

Training at the Rawlplug Academy center

Training at the Rawlplug Academy center

Technical Support 2

Technical Support 2

EasyFix

EasyFix

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Installation data

Approvals and publications

Product card and catalogues

Choose product card:

Product card R-STUDS Metric Threaded Rods - Steel Class 1.4529 HCR, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A4

Product card R-STUDS Metric Threaded Rods - Steel Class A4, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class A2, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9

Product card R-STUDS Metric Threaded Rods - Steel Class 10.9, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 8.8, Zinc Flake, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Hot Dip Galvanized, Flat Head

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake

Product card R-STUDS Metric Threaded Rods - Steel Class 5.8, Zinc Flake, Flat Head

Choose product catalog:

Specification Design Guide

General catalogue - PDF