FERC logos
  1. Mainpage
  2. Metric threaded rod, flat head, steel class 5.8 STUDS 24x300mm - cardboard box - 2 pcs.

Metric threaded rod, flat head, steel class 5.8 STUDS 24x300mm - cardboard box - 2 pcs.

Universal
Outlet

R-STUDS-24300-FL

5906675240794

Rawlplug

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

Define product parameters:

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Weight and bulk packaging

  • Unit pack

    2.00 pcs.1.96 kg

  • Bulk pack

    2.00 pcs.1.96 kg

  • Pallet

    770.00 pcs.755.37 kg

Related products

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Hybrid bonded anchor R-KER-II winter version - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II winter version - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

R-KEM-II Polyester Resin Styrene Chemical Resin - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 600 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 410 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Hybrid bonded anchor R-KER-II standard - plastic cartouche - 400 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II standard, grey - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard, stone - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Polyester bonded anchor R-KEM-II standard - plastic cartouche - 175 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Epoxy bonded anchor R-KEX-II 3:1 - plastic cartouche - 385 ml

High-quality bonded anchor based on epoxy resin, approved for cracked concrete, as well as reinforced and unreinforced concrete

SDS plus RawlHAMMER 850 W 2.5J 26 mm Rotary hammer drill - plastic case - 1 pc.

SDS plus Rotary hammer 850W 2,5J 26 mm RAWLCASE

Hybrid bonded anchor R-KER-II winter version - plastic cartouche - 300 ml

Hybrid bonded anchor for high loads based on styrene-free vinylester resin for concrete substrates

Polyester bonded anchor R-KEM-II winter version - plastic cartouche - 300 ml

Polyester bonded anchor without styrene, recommended for medium loads, suitable for use in most construction substrates

Features

Threaded rod made of class 5.8 steel with flat head for use with bonded anchors

  • Threaded rods provide high strength and good wear resistance.
  • Threaded rod mades of carbon steel class 10.9 is suitable for outdoor use and in damp conditions.
  • Can be post-installed through fixture in some cases. (Consult technical advisory service).
  • Class 10.9 provide much more greater tensile and yield strength than the ordinary class 8.8.
  • Hexagonal head for convenient use with torque wrench.

Substrates

Cracked concrete

Cracked concrete

Non-cracked concrete

Non-cracked concrete

Clay block

Clay block

Aerated concrete

Aerated concrete

Aerated concrete block

Aerated concrete block

Brick

Brick

Hollow brick

Hollow brick

Approved surfaces

Applications

Air conditioning / ventilation

Anchoring glued in with threaded rods

Barriers

Ceiling mounts

Elevators and escalators

Pipelines

Steel structures

Full list of variations

Diameter
Length
Rod end
Corrosion protection
Packaging and quantity
Index
EAN
Catalog price for pack. net

Substitutes

R-STUDS Threaded Rod M24 x 300mm, Hex Head, Class 5.8 - cardboard box - 2 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 24x300mm - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 24x300mm - cardboard box - 2 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

R-STUDS Threaded Rod M24 x 300mm, Hex Head, A4 Stainless Steel - cardboard box - 2 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 5.8, hot dip galvanized STUDS 24x300mm - cardboard box - 5 pcs.

Threaded rod made of class 5.8 steel with hot-dip galvanization for use with bonded anchors

R-STUDS Threaded Rod M24 x 300mm, Hex Head, Class 5.8 - cardboard box - 2 pcs.

Threaded rod made of class 5.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8 STUDS 24x300mm - cardboard box - 5 pcs.

Threaded rod made of class 8.8 steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 8.8, hot dip galvanized STUDS 24x300mm - cardboard box - 2 pcs.

Threaded rod made of class 8.8 steel with hot-dip galvanization for use with bonded anchors

R-STUDS Threaded Rod M24 x 300mm, Hex Head, A4 Stainless Steel - cardboard box - 2 pcs.

Threaded rod made of A4 stainless steel for use with bonded anchors

Metric threaded rod, hexagonal head, steel class 5.8, hot dip galvanized STUDS 24x300mm - cardboard box - 5 pcs.

Threaded rod made of class 5.8 steel with hot-dip galvanization for use with bonded anchors

Installation guide

Installation manual

Installation step by step

1

Fill hole with the required resin to the recommended fill level. (Follow the relevant instructions for the resin product).

2

Insert the threaded stud slowly and with a slight twisting motion, until the required embedment depth is reached.

3

Leave to solidify for the time required for the application.

4

Attach fixture and tighten the nut to the required torque.

5

Item is properly attached.

Installation data

Approvals and publications

Catalogues and product cards

(11)

Product cards(8)

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download

Product card

Download
Catalogues(3)

Catalogue Offer (overview) - EN

Download

Specification Design Guide

Download

General Catalogue EN - PDF

Download